Can you post your /var/log/XFree86.0.log? There are some Trio64's out there which claim to be V+'s but are just regular Trio64's. Have you tried the "s3" driver and it fails on your board?
ani On Wed, 18 Sep 2002, Ritchard Nash wrote: > Hi all , > I configured xfree 4.2 with an S3 Trio64V+ and a Matrox G200 AGP 2x. > i've 2 problems in order of importance: > 1)If i set in the bios the matrox card as the primary video vard ( init > AGP first ) > then i can use both cards and all go fine.If i set the s3 as the primary > card ( init PCI first ) > then when i run Xfree with the same > configuration (still mga driver and vesa driver ) the matrox screen (!!) > is garbage. > In each case the s3 ( vesa driver ) is fine while the matrox works only > if is set as > first display. I'd like to know if this is a bug ( a known one or > unknown ) and if there is something > that i can do. I tried to disable DRI , AGP 2x and the various extension > but the result > is always the same. > 2) I need the s3 trio v64+ drivers!! Oh well , i'dlike to know if this > card will be supported > in XF4.3 or i can trow it out of the window! I'm using it with vesa > driver and the 60Hz > refresh is getting me blind!!!! > > Cheers , > Ritchard Najsh > > > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert > _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
