I have recently built XFree86 from cvs since the changes to the
radeon_driver.c et. al. seem to be in place. Unfortunately, I still cant
seem to get the second output of the card to activate. Once I start X, it
does seem to think there is a second monitor, since my desktop seems to be
twice the size(the cursor runs to the right about teh monitor width past the
screen edge), and X does detect both my monitors, and doesnt complain about
anything abnormal AFAIKT. It just doesnt sem to actually turn on the out
put. At the moment I am not sure which options to turn on to get the second
output activated. below is a copy of my XFConfig-4. Thank you:
#############Begin####################
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "ServerLayout"
Identifier "RadeonDH"
Screen 0 "Screen0" 0 0
Screen 0 "Screen1" Leftof "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Radeon0"
Driver "radeon"
BusID "PCI:1:0:0"
Screen 0
Option "DDCMode"
EndSection
Section "Device"
Identifier "Radeon1"
Driver "radeon"
BusID "PCI:1:0:0"
Screen 1
Option "DDCMode"
EndSection
Section "Monitor"
Identifier "Display0"
HorizSync 24.0 - 82.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Display1"
HorizSync 24.0 - 82.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Radeon0"
Monitor "Display0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Radeon1"
Monitor "Display1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
#Option "Crt2Dac2"
Option "CloneDisplay" "1"
EndSection
Section "DRI"
Mode 0666
EndSection
####################end################
Thanks again for any insight or help someone can offer
John Hughes
_______________________________________________________________________________
This e-mail, and any attachments, are confidential and access
by anyone other than the addressee(s) is unauthorized. The
security of e-mail communication cannot be guaranteed and
neither UBS AG, nor any of its affiliates, accepts liability
for claims arising as a result of the use of this medium to
transmit messages from or to UBS AG, or any of its affiliates.
If you are not the intended recipient, any disclosure,
copying, forwarding or distribution of this e-mail is
prohibited. We would be grateful if you would notify the
sender of any instances where this occurs.
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
