> The mga drivers from Matrox works even worse than the mga driver from > XFree86. > It won't accept modelines that work fine under your mga driver, and under > NetBSD ARM32 kernelmodes, and under WindowsME. > > On the 2 first screens however, everything always works fine. It is > always on the last 4 screens that things go wrong, on both mga drivers. > > I tried different window managers, and it seems its not their problem. > After testing more thoroughly, with x11perf, I see that it is quite > random which X draw operations works. > > Do I really have to rewrite the XFree86 mga driver to make this work? > > Kim0
Perhaps it is a hardware problem? Can you ensure all cards do really work? Have you tried using them one by one? Perhaps it'll do to switch slots on the mainboard? Does anything change when you disable do 'Option "NoAccel" "Yes"'? Can the both PCI cards do 'quadrohead' (hihi) when used without the AGP card? Have you tried the combinations AGP-PCI1, AGP-PCI2, only? Perhaps the card is buggy somehow when combining AGP and PCI versions? Just some ideas, don't know if it could by any of them. Regards, Mikael > > _______________________________________________ > Xpert mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xpert _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
