"Brian Hostetter" <[EMAIL PROTECTED]> writes: > My new RH 7.3 system hard-locks (no ping response, reboot required) 100% of > the time when I try startx with a 3DLabs Oxygen VX-1 32MB PCI card setup as > second of two displays. It does the same thing if I drop my primary card > and try the Oxygen by itself. My system is an Asus-based P41.8A and I use > an Elsa Gladiac Ultra for primary. I've been using X for over 3 years, and > I'm fairly sure it's not my config file (I can swap the Oxygen for a Blade3D > card and only change the driver in my config and it works dualhead). I've > also tried moving the card around the few free PCI slots, but to no avail. > Is this card supported by the RH7.3 version of XF 4.2 and has anyone else > gotten a similar configuration to work? Please find my attached > XF86Config-4 file. The PC locks HARD, so there's no logs generated when the > problem occurs. Thanks.
I've got one of those cards and it works fine with stock XF86 4.2.0. Some things to try: - Comment out everything in the Module section. If it helps, put back one line at a time and report which one causes trouble. - Start the computer with console on a serial port. This will let you see any panic messages hidden by X. Does the crash happen immediately or after some time? -- M�ns Rullg�rd [EMAIL PROTECTED] _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
