I have a ATI Radeon 7500 card, which has a VGA, a DVI and a Video output
and want to connect a CRT monitor (1280x1024) and a LCD (1024x768). As
long as I am in the console mode, there are on both displays the same
images. When I start the X-server only the monitor has a image, the LCD
panel is dark. There is a error message in the log file which cause this
problem, but I can't get rid of it. I read the mailings of the last
months but cannot find any hint. I use a original SuSE 8.0 distri.
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
Here is a cut from the Xfree log file:
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C EDID Info:
(II) RADEON(0): Manufacturer: SPD Model: 5101 Serial#: 2018915346
(II) RADEON(0): Year: 1999 Week: 5
(II) RADEON(0): EDID Version: 1.1
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display
(II) RADEON(0): redX: 0.570 redY: 0.365 greenX: 0.308 greenY: 0.554
(II) RADEON(0): blueX: 0.149 blueY: 0.121 whiteX: 0.318 whiteY: 0.356
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): End of DDC Monitor info
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=35000;
xclk=18300
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) RADEON(0): Mode 1024x768 is out of range.
Valid mode should be between 640x480-1x1
(EE) RADEON(0): No valid mode found for this DFP/LCD
(II) RADEON(0): If you have an analog monitor attached but no DFP/LCD
tryspecifying
'Option "CrtScreen"' in your X serverconfig file.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(II) RADEON(1): PCI bus 1 card 0 func 0
(**) RADEON(1): Depth 8, (--) framebuffer bpp 8
I dont know why mode 1024x768 is out of range and a valid mode is only
640x480-1x1?
Can anyone give me a hint?
Thanks
Peter Kunzmann
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
