On Mit, 2002-09-25 at 14:56, [EMAIL PROTECTED] wrote: > *** Resolution change in ATI Rage Mobility M3 problem od Dell C600 > Latitude laptop. Ask for help *** > > On my Dell C600 laptop works X well in 1024x786 reaolution, there > is no problem, but I would like to get LOWER resolution 640x480 in > some occasions. > (I would like to play TuxRacer fullscreen ;-)) > > Whatever I set in XF86Config-4, setting "Display" subsection as > suggested in forums, setting modelines directly, restricting Modes > in display subsection to only 640x480 resolution; X starts still > only in 1024x786! > > And worse yet, CTRL ALT +/- DOESN'T WORK! After pressing, nothing > happens. It looks like, X select "smartly" only the best > resolutin, whatever I write to config file. > (In another words, it's ignoring me :-))
[...] > Section "Monitor" > Identifier "Generic LCD Panel 1024x768" > VendorName "Unknown" > ModelName "Unknown" > HorizSync 31.5-48.5 > VertRefresh 40-70 [...] > (II) R128(0): Generic LCD Panel 1024x768: Using hsync range of > 31.50-48.50 kHz > (II) R128(0): Generic LCD Panel 1024x768: Using vrefresh range of > 40.00-70.00 Hz > (II) R128(0): Clock range: 12.50 to 250.00 MHz > (II) R128(0): Not using mode "640x480" (hsync out of range) > (II) R128(0): Not using mode "640x480" (hsync out of range) No, it's not ignoring the sync ranges you provide. ;) -- Earthling Michel D�nzer (MrCooper)/ Debian GNU/Linux (powerpc) developer XFree86 and DRI project member / CS student, Free Software enthusiast _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
