I'm trying to get X (with xinerama) to work with two Voodoo 3 2000 cards. Everything's fine with the primary card, but nothing seems to happen with the second. If I make an XF86Config with `XFree86 -configure` it picks up both cards, but doesn't pick up the monitor's values, which it does if I swap the monitors over.
Also when I run X with the config it all seems fine - there are no error messages, however I don't get the card's BIOS appearing, in fact the screen remains in it's stand-by mode. I can however move the mouse over into where the second half of the desktop should be, but it won't come back. I'm at a loss. The best I can come up with is that the second card isn't softbooting properly, although it says it is in the log: (II) TDFX(1): Softbooting the board (through the int10 interface). (==) TDFX(1): Write-combining range (0xa0000,0x20000) was already clear (II) TDFX(1): Softbooting the board succeeded. Are there known issues with Voodoo's and softbooting? Or could it be something else? -- Ed. What color is a chameleon on a mirror? _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
