Try running it like this from a remote computer via telnet or SSH:
gdb XFree86
When it faults enter on the gdb commandline:
bt
This will result in a calling trace which might help resolving the root cause.
-Alex.
> -----Original Message-----
> From: Ed Lea [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, October 26, 2002 15:37
> To: [EMAIL PROTECTED]
> Subject: [Xpert]Odd Xinerama problem
>
>
> I have a quite complicated and obscure set up that is only working in
> part. I have 3 graphics cards in my box: 1 Voodoo 3 2000 PCI,
> 1 ATI AGP
> and 1 ATI PCI. The Voodoo is the primary card, and for some reason has
> to be, as if it's not X can't "softboot" it (it seems).
>
> If I run with all 3 screens using Xinerama all is okay. However, for
> reasons I won't go into, I want to be able to use just the
> two ATIs and
> so have a screen layout that defines this. If I use this
> layout with out
> using xinerama it works, however with xinerama X seems to start, but
> then dies with:
>
> Fatal server error:
> Caught signal 11. Server aborting
>
> Does anyone have any clues why this is happening?
>
> --
> Ed.
>
> Stupidity got us into this mess - why can't it get us out?
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
>
>
