[Xpert]Trio 64 3D

[Frank v Waveren]

I'm having some trouble getting a Trio 64 3D AGP working with XFree86
4.2.0. With the config XFree86 generates the screen flashes on
startup and then stays black. The log gives this: 

(++) Using config file: "/root/XF86Config.new"
        Trio3D -- Display is on...turning off
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x3a807f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x00915f80
        Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x3a007f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x3e915f80
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80
        Trio3D -- GE was on ST#1: 0x20007f80 ST#2: 0x20007f80
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x35007f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x38115f80
        Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f80
        Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
        Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20007f80

At which point it hangs, unkillable by anything but SIGKILL.
(The screen stays black and switching back to a vt with chvt(1)
doesn't give any visible results).

Stracing the process gives an infinite loop of:
 read(5, "", 4)                          = 0
 select(1024, [5], NULL, NULL, {0, 0})   = 1 (in [5], left {0, 0})
(fd 5 is /dev/null)

Even with the vesa driver I cannot get anything displayed.

Here is the lspci output:
01:00.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) (prog-if 00 [VGA])
        Subsystem: S3 Inc. 86C365 Trio3D AGP
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [44] Power Management version 1

        
The system is a Pentium II on an ABIT LX6 motherboard (based on the
intel 440LX chipset).
        
-- 
Frank v Waveren                                      Fingerprint: 21A7 C7F3
fvw@[var.cx|stack.nl|dse.nl|chello.nl] ICQ#10074100     1FF3 47FF 545C CB53
Public key: hkp:[EMAIL PROTECTED]            7BD9 09C0 3AC1 6DF2
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert