Hi
I have a Trio 3d vidoe card (4mb) and really really want to get a higher
resolution than 1024x768. I've just upgraded to XFree86 4.2.1.
The problem is that when I try to set a higher ersolution (16bpp) it
only draws a correct width at 1024. The rest (from 1025 to e.g. 1152) is
copied from the right side of the perfectly drawn screen.
I've tried many settings - even rising the bpp to 24 (I really wanted
32, but the s3virge driver doesn't allow this...) but this width to the
correctly drawn screen only reduces to 800 or 640 (not quite sure...).
I would send you a screen shot to illustrate, but my X-window manger
sees the full desktop and the screen shot does not illustrate the
problem.
I attach 3 log files from X (-verbos):
- 1024-768-16.log The current working setup (read: 1024 * 768; 16bit)
- 1024-768-24.log Broken...
- 1152-864-16.log Broken...
Please help - Its very frustrating on a 17"...
~J�rn Christensen
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.7-10custom i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Sun Nov 3 15:35:57 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "dk"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/windows_basic/,/usr/X11R6/lib/X11/fonts/windows_extra/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI: (0:8:0) 3dfx Interactive Voodoo2 rev 2, Mem @ 0xc6000000/24
(--) PCI:*(1:0:0) S3 Trio3D rev 1, Mem @ 0xc8000000/26, BIOS @ 0xcfef0000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.8.3
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(**) Chipset override: 86c365
(**) Chipset trio 3d found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
(**) S3VIRGE(0): Option: pci_burst - PCI burst read enabled
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(**) S3VIRGE(0): Chipset: "86c365"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): Manufacturer: HSL Model: 6a7 Serial#: 0
(II) S3VIRGE(0): Year: 1999 Week: 7
(II) S3VIRGE(0): EDID Version: 1.1
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) S3VIRGE(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync
or SyncOnGreen
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) S3VIRGE(0): Gamma: 2.25
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): redX: 0.624 redY: 0.340 greenX: 0.281 greenY: 0.594
(II) S3VIRGE(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 720x400@70Hz
(II) S3VIRGE(0): 720x400@88Hz
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@67Hz
(II) S3VIRGE(0): 640x480@72Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@56Hz
(II) S3VIRGE(0): 800x600@60Hz
(II) S3VIRGE(0): 800x600@72Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 832x624@75Hz
(II) S3VIRGE(0): 1024x768@87Hz (interlaced)
(II) S3VIRGE(0): 1024x768@60Hz
(II) S3VIRGE(0): 1024x768@70Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) S3VIRGE(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 56.2 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
(II) S3VIRGE(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376
h_border: 0
(II) S3VIRGE(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 108.0 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) S3VIRGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) S3VIRGE(0): Ranges: V min: 47 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock
max 110 MHz
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 90.384 MHz
(WW) S3VIRGE(0): Monitor0: Using default hsync range of 30.00-70.00kHz
(WW) S3VIRGE(0): Monitor0: using default vrefresh range of 47.00-160.00Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Monitor0) mode clock 122MHz exceeds DDC maximum 110MHz
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(--) S3VIRGE(0): Virtual size is 1152x864 (pitch 1152)
(**) S3VIRGE(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) S3VIRGE(0): Display dimensions: (320, 240) mm
(**) S3VIRGE(0): DPI set to (91, 91)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(==) S3VIRGE(0): Write-combining range (0xc8000000,0x400000)
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f807f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x1f815f00
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
7 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) S3VIRGE(0): DPMS enabled
(**) Mouse0: Protocol: "imps/2"
(**) Mouse0: Core Pointer
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x3d007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x3d015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x38007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x38015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.7-10custom i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.1.log", Time: Sun Nov 3 15:37:18 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "dk"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/windows_basic/,/usr/X11R6/lib/X11/fonts/windows_extra/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI: (0:8:0) 3dfx Interactive Voodoo2 rev 2, Mem @ 0xc6000000/24
(--) PCI:*(1:0:0) S3 Trio3D rev 1, Mem @ 0xc8000000/26, BIOS @ 0xcfef0000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.8.3
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(**) Chipset override: 86c365
(**) Chipset trio 3d found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
(==) S3VIRGE(0): RGB weight 888
(==) S3VIRGE(0): Default visual is TrueColor
(**) S3VIRGE(0): Option: pci_burst - PCI burst read enabled
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(**) S3VIRGE(0): Chipset: "86c365"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): Manufacturer: HSL Model: 6a7 Serial#: 0
(II) S3VIRGE(0): Year: 1999 Week: 7
(II) S3VIRGE(0): EDID Version: 1.1
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) S3VIRGE(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync
or SyncOnGreen
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) S3VIRGE(0): Gamma: 2.25
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): redX: 0.624 redY: 0.340 greenX: 0.281 greenY: 0.594
(II) S3VIRGE(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 720x400@70Hz
(II) S3VIRGE(0): 720x400@88Hz
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@67Hz
(II) S3VIRGE(0): 640x480@72Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@56Hz
(II) S3VIRGE(0): 800x600@60Hz
(II) S3VIRGE(0): 800x600@72Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 832x624@75Hz
(II) S3VIRGE(0): 1024x768@87Hz (interlaced)
(II) S3VIRGE(0): 1024x768@60Hz
(II) S3VIRGE(0): 1024x768@70Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) S3VIRGE(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 56.2 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
(II) S3VIRGE(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376
h_border: 0
(II) S3VIRGE(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 108.0 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) S3VIRGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) S3VIRGE(0): Ranges: V min: 47 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock
max 110 MHz
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 90.384 MHz
(WW) S3VIRGE(0): Monitor0: Using default hsync range of 30.00-70.00kHz
(WW) S3VIRGE(0): Monitor0: using default vrefresh range of 47.00-160.00Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1152x864" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x960" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x960" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) S3VIRGE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using mode "1152x864" (no mode of this name)
(II) S3VIRGE(0): Not using mode "1280x960" (no mode of this name)
(**) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Mode "1024x768": 82.3 MHz, 58.8 kHz, 73.3 Hz
(**) S3VIRGE(0): Display dimensions: (320, 240) mm
(**) S3VIRGE(0): DPI set to (81, 81)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
(==) Depth 24 pixmap format is 32 bpp
(==) S3VIRGE(0): Write-combining range (0xc8000000,0x400000)
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x33807f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x33815f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x33007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x33015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x2e007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x2e015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) S3VIRGE(0): DPMS enabled
(**) Mouse0: Protocol: "imps/2"
(**) Mouse0: Core Pointer
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
Trio3D -- Display is on...turning off
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x23007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x23015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- GE was on ST#1: 0x20007f00 ST#2: 0x20007f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
Trio3D -- S3VNopAllCmdSets: SubsysStats#1 = 0x20007f00
Trio3D -- S3VNopAllCmdSets: state changed after 0 iterations
Trio3D -- S3VNopAllCmdSets: SubsysStats#2 = 0x20015f00
