My recent readings from the Xpert mailing list
make me think that the Radeon 9000 was just
recently added and fixed in the CVS repository.
(look at the ML archives for the postings)
This means not even XF86 4.2.1 is sufficient.
You should try out the CVS tree for your computer.
-Alex.
> -----Original Message-----
> From: Martin Litzenberger [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, November 05, 2002 13:51
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: [Xpert]ATI Radeon IGP 320M and XFree86
>
>
> Hello
>
> i have a laptop with a ATI radeon IGP 320M chip installed.
> According to
> the ATI homepage it is 100% software compatible to the Radeon
> 9000 card
> for desktops.
>
> The xfree 4.1.0 log reports a ChipID of 0x4336 for this card. I have
> tried to configure it as a radeon VE (by specifiying a ChipID
> of 0x5159
> in the config file) but this results in a crash.
>
> Can i use it with X 4.2.0 and the solution to specifiy the ChipID as
> e.g. 0x4242 (for the radeon 8500) in the config file as it has been
> described earlier in this mailing list to run the card under
> XFree 4.2.0
> with the radeon driver?
>
> does anybody have experience with this card and XFree 4.2.0
> or 4.1.x? I
> have now configured it as framebuffer device, which does
> work, but SLOW.
>
> martin
> _______________________________________________
> Xpert mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xpert
>
>
