X gurus, Can anyone help with using the new Radeon9000 driver support with Xinerama? The setup is as follows:
One AGP Nvidia 4400 (middle display) Two PCI Radeon 9000s (left and right displays) All displays at 1600x1200 (DVI) Latest X from CVS Binary drivers from Nvidia Linux 2.4.19-16mdk Here's the config: http://www.seanadams.com/x/XF86Config-4 If I try to start with all three displays enabled, X dumps core with a bunch of warnings about unresolved symbols (I'm aware that these are not necessarily a problem). Here's the log with all three displays enabled: http://www.seanadams.com/x/allthree.log If I disable *either* of the ATI cards, everything works fine with just two heads. Here's a log of that, with just middle and left screens enabled: http://www.seanadams.com/x/justtwo.log Disabling the Nvidia card doesn't make any difference. I also tried putting one of the ATI cards in a different slot, and verifying that they're not sharing an IRQ. Now there's one other thing I should mention, but it's probably a red herring: before upgrading to the current CVS source, I was using V4.2.0. After upgrading, the new version was not able to find its libraries until I exported LD_LIBRARY_PATH="/usr/X11R6/lib". The old version didn't need this... how come? Did I miss a compile-time option? Is this related to the unresolved symbol stuff above? Any assistance would be greatly appreciated. Thanks, Sean _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
