On Thu, May 7, 2009 at 11:44 PM, Mads Kiilerich <m...@kiilerich.com> wrote: > Emre Erenoglu wrote, On 05/07/2009 03:46 PM: >> >> 2) cvs version configures and compiles fine after bootstrap, however, >> there are some problems: >> 2.1) If you give a --prefix parameter to configure script, like >> --prefix=/usr , then the compiled binaries try to look in /usr/etc for >> config files and /usr/var/run for putting the pid files. Thus there's >> an issue here. If you configure without parameters, then it works >> fine. I had to patch the configure.ac script to workaround this >> problem >> > > Other packagers patch the configure script. Let's hope Jay applies one of > the versions ... >
Yes, I've done the same. However, even with suse patches and 0.4.1 version, an ordinary configure, make and make install still can't find the libvnc.so, unless I put: lib=libvnc.so line in the xrdp.ini file. I don't want to put the /usr/local/lib/xrdp or /usr/lib/xrdp into my ld.so.conf and the linker is using necessary flags. Strange... Emre ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ xrdp-devel mailing list xrdp-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xrdp-devel
