OKAY. Thank you Sven for this thorough investigation into Autodesk Network Licensing.
hopefully support gets back to me (soon) and i won't bother before long time, this list, about Maya 2022 licensing with XSI licensing. kind regards Mathias On Tue, May 10, 2022 at 3:03 PM Sven Constable <[email protected]> wrote: > Well, in 1997 it was different. IIRC until Softimage was sold to ADSK, it > used SPM and not FlexLM for licensing. > > > > Yes, a network is more than one computer connected in a network... there’s > much more to that of course. > > In short and regarding adsk network licensing: > A computer (usually server type in a company network) is used as the > license server and distributes the licenses over the network. > > All workstations get their licenses from that server, depending on how > many licenses you have available (one license means one workstation/laptop > can use it at a time. Using the license on second computer means you have > to close XSI on the first computer). > > Thats why it’s also called “floating” licensing. > > > The server runs FlexLM. The workstations don’t need it and only have the > application (XSI,Maya etc.) installed. In your funky setup the same machine > runs both. Obviously it works nonetheless. > > > Older lic files don’t lose validity btw.. They will work indefinetly and > can be combined with newer licenses. In your scenario that can mean you’re > potentially able to run several computers (one with maya 2015, another with > XSI2015, a third with Maya2012 and so on) simultaneously. Most likely it > won’t work in your case, because you got new licenses for entirely new > computers over the years. > > > > FlexLM is the licensing software itself, LMTools is for managing the > licenses. NLM stands for NetworkLicenseManagement and is just another word > for the whole process. > > > > Sven > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 2:05 PM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > Ah ok.ty for your explanation! > > I don’t even know why i got sold a « network » instead of a « standalone > », i think since 1997. > > Always only used a single computer for softimage at a time since then. > > In around 2008 i asked my reseller why and if i could switch to > standalone: he told it was « impossible ». > > > > What is a network? Just two computer connected? How? With a cable like > ethernet? Or does it have to be monitored by a « master » computer, this > connexion between computers forming a network? > > > > So in such network i guess if one of the computer got the LM Tools utility > lic file running, the other computers dont need it, and can just come added > provided they have installer, serial and product key each? > > > > Is it what you tell me? > > > > Or FlexLM is something else than LM Tools NLM ? > > > > Sincerely > > Mathias > > > > Le mar. 10 mai 2022 à 13:46, Sven Constable <[email protected]> a > écrit : > > ADSK support will surely help you. However you also need to understand the > principles. :) > > > > Basically they’re four things that have to match: > > Installer, serial, product key, and license file(s). > > > > The first three work together and are needed for installation of the > application. An internet connection is not necessary and they are not > online checked with ADSK servers (I think). There is no activation when > you’re using network licensing. You can install anything on any machine and > as often as you like. > > > > The licensing via FLexLM is a seperate part and will grant the license > over your network to any machine requesting it. You need to know which > licenses you have (it sounds you have several by now, issued over the > years?) and you can have several license-services running. > All managed by FlexLM. It’s also possible to combine licenses into one > file, if needed. > > Good luck, > > Sven > > > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 1:13 PM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > YES, i finally loaded the 977H1 i guess its for softimage with Maya 2016 i > got the serial in my files. > > > > but now i need a new Lic file for LMTools > > support is really not very responsive i am sorry > > > > i wish i could still use Maya2022 too i need to know what it is, if its > still as ugly as people used to say :) > > > > so ill try to seek some more help from support > > thank you Sven, appreciated > > > > On Tue, May 10, 2022 at 1:08 PM Sven Constable <[email protected]> > wrote: > > The product key depends on the product you’re about to install. You need > to use the matching key :) > > > > When ADSK begun to ship these bundled versions (Max+soft, maya+soft), it > was a bit more complicated because they all had their dedicated product > key. But there is one matching your serial. > > > > Sven > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 12:32 PM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > Oh thats interesting because Maya with Softimage stops after 2020 > > on that website you gave at least. anyway i tried the product key of Maya > with Softimage 2019 and red cross was there notwithstanding.. > > i ll contact support again. thank you. > > i ll ask them what about Maya 2022 being still distributed in accounts > > see i received this from Autodesk on my email: March 24th 2021: > > Maya with Softimage 2022 Non-Language Specific Commercial Product Upgrade > Multi From Subscription-AF Only > > > > On Tue, May 10, 2022 at 12:21 PM Sven Constable <[email protected]> > wrote: > > You can get the matching product key here: > > > https://www.autodesk.com/support/download-install/individuals/product-key/look-up-product-keys > > > > Maya+Softimage 2015 is 977G1 but double check which version you have. > > Sven > > > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 11:56 AM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > to exemplify > > > > is this the new normal way to install? ignoring this? > > > > On Tue, May 10, 2022 at 11:47 AM Isis Hathor <[email protected]> > wrote: > > Thank you Sven > > the main problem is i cannot install XSI, as the serial Autodesk gave me > in March 21 is validated during install > > but the product ID is cross red "non valid", therefore i cannot even > install it > > > > i tell that to Autodesk support and they seem to superbly ignore this. > > maybe its "normal" but to me it seems unusual (from past experience) > > > > the same occurs with Maya 2022 > > > > and the same non recognized Product ID on install with a previous serial > sent to me by autodesk in 2019 !! i just re tried. > > > > (i only have one laptop open at the moment when this all occurs.) > > > > On Tue, May 10, 2022 at 11:37 AM Sven Constable <[email protected]> > wrote: > > You mean setting the client ports to all ports? That is usually done > during installation of XSI and only needed on the client machine (your > laptop). It should have an firewall rule already set up. To make sure just > check the inbound rules on the laptop. > I don’t know how it is named...probably something like Softimage2015, > Autodesk Softimage, MayaSoftimage etc. > > Check if it allows the entire application on all ports. > > > > It’s also possible that your problem has nothing to do with firewall > settings. Try turning the FW off on both machines (temporarily ) and try > starting XSI. > > Sven > > > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 11:16 AM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > Thank you Sven, still not unfortunately, same error. > > i went like you on the "" > https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-set-exceptions-for-Autodesk-Network-License-Manger-in-Windows-Firewall.html > "" > > > > it was written at the end: > > <<Attention: > Please set in all rules the Client ports to *All ports *and the Server > ports to *2080, 27000-27009, *as the license tool on the client will use > also other ports. > The server will always use by Default the ports 2080, 27000-27009 unless > you change the ports in the license file.>> > > > > how can i do this last step, as i don't seem to have the image tool (here > attached) below this attention warning? > > > > On Tue, May 10, 2022 at 11:01 AM Sven Constable <[email protected]> > wrote: > > Open Windows firewall (on the machine running Flexlm). > > Right click on “Inbound Rules”--> New Rule... > > As type, choose “Port”. > > Use TCP and add “2080, 27000-27009” as the port ranges. Click Next. > > Use “Allow the connection”. Next... > > Check profiles you want it to apply (domain, private, public). I allowed > all of them. Click next... > > Give it a name (eg. FlexLM). > > > > Thats it. > > > Sven > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 10:45 AM > *To:* [email protected] > *Subject:* Re: error in Maya2022 (plus Softimage) activation > > > > The lmtools server status check seems telling its ok for him. > > > > I have alway had a Network license and often had trouble when installing / > activating and needed help from Autodesk support. > > > > Could you clarify to me how to accomplish the following please Sven? > > > > <<Add firewall exceptions on the server (ports 27000-27009 for lmgrd.exe; > port 2080 for adskflex.exe). You can add both applications or only the > ports in one rule.>> > > > > Thanks > > Mathias > > > > Le mar. 10 mai 2022 à 10:30, Sven Constable <[email protected]> a > écrit : > > Some possible reasons: > > > > *License service isn’t running.* > > Start Lmtools-> “Server Status”->”Perform Status Enquiry”)? It will show > the licence(s) issued. > > > > *Laptop can’t connect to the server running the service (network or > firewall problem).* > > Add firewall exceptions on the server (ports 27000-27009 for lmgrd.exe; > port 2080 for adskflex.exe). You can add both applications or only the > ports in one rule. > > Firewall exceptions for XSI.exe are usually done automatically during > install. > > Are you sure, you have a network license? I’m asking because there is no > activation when using network licenses. > > > > Sven > > *From:* [email protected] <[email protected]> *On Behalf > Of *Isis Hathor > *Sent:* Tuesday, May 10, 2022 9:38 AM > *To:* [email protected] > *Subject:* error in Maya2022 (plus Softimage) activation > > > > Hi Listees, > > > > I am trying to load SI2015s2 > > On Maya2022 (+Softimage) > > Which is on my autodesk account since march21 > > > > I paid to the last limit, my maintenance ended oct21. > > > > The download of Maya2022 is ok > > But upon install, if the provided serial is validated, the Product ID > (also received by AUtodesk in march21) is not (red cross instead than green > check) > > > > I am unsure if this could be the cause of the problem i get activating the > software on this computer. > > > > I loaded the LMTools utility server runs check done lic file replaced by > autodesk yesterday. > > It is a network license. > > I choose single license user. > > But always error in activation is received. > > > > My laptop is Asus zenbook windows 10pro 64bits > > see specifications attached > > > > and both errors appearing when trying activation. > > > > any idea? > > > > thank you > > mathias > > > > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufMM5F3-NwH9OcTo%3DL6ftxy6xS3knWyCa7GYObuT%2B53uEw%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufMM5F3-NwH9OcTo%3DL6ftxy6xS3knWyCa7GYObuT%2B53uEw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/000001d86448%2435261220%249f723660%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/000001d86448%2435261220%249f723660%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufMRVJ14crx4v0mQ%3Dp5LZUtyWruMWsQSTABsHQAQi1UGvQ%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufMRVJ14crx4v0mQ%3Dp5LZUtyWruMWsQSTABsHQAQi1UGvQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/000a01d8644c%248472fc90%248d58f5b0%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/000a01d8644c%248472fc90%248d58f5b0%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufOJDZZgmcjGkLsoHAjSYZyoNQSSXBhrBgu4C1ZsAsbfeg%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufOJDZZgmcjGkLsoHAjSYZyoNQSSXBhrBgu4C1ZsAsbfeg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/001301d86451%249a618300%24cf248900%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/001301d86451%249a618300%24cf248900%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufPF%2BTs9HnNoPnCecHbMgs%3D5h2mGEBNdF%2BvwJYFns3wNaw%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufPF%2BTs9HnNoPnCecHbMgs%3D5h2mGEBNdF%2BvwJYFns3wNaw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/002001d86457%24bc6d9460%243548bd20%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/002001d86457%24bc6d9460%243548bd20%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufNkwyC2oizpZAmbEBCOsw4V7M0dzmY%2B%2BYhnzzrsV9%2BBPg%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufNkwyC2oizpZAmbEBCOsw4V7M0dzmY%2B%2BYhnzzrsV9%2BBPg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/002901d8645e%2449e88bf0%24ddb9a3d0%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/002901d8645e%2449e88bf0%24ddb9a3d0%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufNrH2BgY125T%2BR5Ubv7frna5YvdH03N7%3DAuqH_RNWp8Yg%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufNrH2BgY125T%2BR5Ubv7frna5YvdH03N7%3DAuqH_RNWp8Yg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/003201d86463%24a4970450%24edc50cf0%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/003201d86463%24a4970450%24edc50cf0%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/CAC%2BEufPT_sJipajJOjK_v6S%3DhAXvx-q80jHWjxwyYRq8Gk3Ujw%40mail.gmail.com > <https://groups.google.com/d/msgid/xsi_list/CAC%2BEufPT_sJipajJOjK_v6S%3DhAXvx-q80jHWjxwyYRq8Gk3Ujw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Softimage Mailing List" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/xsi_list/003b01d8646e%244d3070b0%24e7915210%24%40imagefront.de > <https://groups.google.com/d/msgid/xsi_list/003b01d8646e%244d3070b0%24e7915210%24%40imagefront.de?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Softimage Mailing List" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/xsi_list/CAC%2BEufMCR4_%3DKM-A_mqz84m3_98d4ypbLySNiY1a6BEGddBf3w%40mail.gmail.com.
