Hi, for anyone else interested: Switching to the VESA driver in the xorg.conf lets come up a display and Build 107 runs.
Regards Ewald On Fri, Feb 20, 2009 at 8:45 AM, Ewald Ertl <ewald.ertl at gmail.com> wrote: > Hi Niveditha, > > I have attached the following files: > o) xorg.conf_backup : this is my xorg config on Build 106. Here I have > removed > the RgbPath as stated in Alan Coopersmith's Weblog > <http://blogs.sun.com/alanc/entry/xorg_1_5_3_in>. > > o) Xorg.0.log_with_106cfg : The log file with the xorg.conf_backup, but > with removed > RgbPath entry. > > o) Xorg.0.log_without_config : Removed the xorg.conf and started with the > builtin > values. > > o) scanpci.txt : The result of scanpci on the Build 107. > > Here I'm using an attached external monitor on Build 106 in dual screen > mode. > But for the test, I have disconnected the external monitor. > > Thanks for your help > > Ewald > On Thu, Feb 19, 2009 at 6:12 PM, Niveditha Rau <Niveditha.Rau at > sun.com>wrote: > >> Could you please include the entire /var/log/Xorg.0.log and the output of >> scanpci. >> >> Thanks >> Niveditha >> >> Ewald Ertl wrote: >> >> Hello, >>> >>> Today I upgraded my Fujitsu Siemens Laptop to Build 107. >>> bash-3.2$ prtdiag >>> System Configuration: FUJITSU SIEMENS LIFEBOOK S6120 >>> BIOS Configuration: Phoenix/FUJITSU Version 1.25 01/29/2004 >>> >>> >>> After the reboot, *X fails to start. * >>> >>> The Xorg.0.log showed >>> >>> Couldn't find PLL settings for mode! >>> >>> This is in combination with an intel graphic-Chipset. >>> There are some entries for the Xorg on the Linux side. >>> >>> Ewald >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> xwin-discuss mailing list >>> xwin-discuss at opensolaris.org >>> >>> >> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/xwin-discuss/attachments/20090221/5e3a5c66/attachment.html>
