OK, updated to snv_66 today, re-edited my xorg.conf to use the i810 driver
instead of VESA, alas, (cut for legibility):
--------------------------------------------------------------------------
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: SunOS 5.11 i86pc
Current Operating System: SunOS asagao-jkk 5.11 snv_66 i86pc
Build Date: 25 May 2007
Solaris ABI: 32-bit
SUNWxorg-server package version: 6.9.0.5.11.6600,REV=0.2007.05.25
SUNWxorg-graphics-ddx package version: 6.9.0.5.11.6600,REV=0.2007.05.25
SUNWxorg-mesa package version: 6.9.0.5.11.6600,REV=0.2007.05.25
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
...
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "MSI MS-1057 Tuned Layout"
(**) |-->Screen "WXGA0" (0)
(**) | |-->Monitor "LCDscreen0"
(**) | |-->Device "Intel950GMA"
(**) |-->Input Device "Trackpad0"
(**) |-->Input Device "Keyboard0"
...
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ
(II) Primary Device is: PCI 00:02:0
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip
Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) I810(0): Chipset: "945GM"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xFFE80000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(EE) GARTInit: Unable to open /dev/agpgart (Resource temporarily unavailable)
(WW) I810(0): /dev/agpgart is either not available, or no memory is available
for allocation. Using pre-allocated memory only.
(II) I810(0): Will try to reserve 32768 kiB of AGP aperture space
for the DRM memory manager.
(II) I810(0): Monitoring connected displays enabled
(WW) I810(0): VideoRAM reduced to 7932 kByte (limited to available sysmem)
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(--) I810(0): VideoRAM: 7932 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
...
(II) I810(0): LCDscreen0: Using hsync range of 45.71-50.53 kHz
(II) I810(0): LCDscreen0: Using vrefresh value of 60.00 Hz
(II) I810(0): 20304 kBytes additional video memory is required to
enable tiling mode for DRI.
(II) I810(0): 7976 kBytes additional video memory is required to enable DRI.
(II) I810(0): Disabling DRI.
(--) I810(0): Virtual size is 1280x800 (pitch 1280)
(**) I810(0): *Built-in mode "1280x800"
(**) I810(0): Built-in mode "1280x800"
(**) I810(0): Built-in mode "1280x800"
(**) I810(0): Built-in mode "1280x800"
(**) I810(0): Built-in mode "1024x768"
(**) I810(0): Display dimensions: (280, 180) mm
(**) I810(0): DPI set to (116, 112)
...
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip
Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(--) I810(0): Xv is disabled because it needs 2D accel and AGPGART.
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 256 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 7680 kByte
(II) I810(0): Allocated 64 kB for the scratch buffer at 0x7af000
(II) I810(0): 8420be8: Memory at offset 0x00020000, size 7680 kBytes
(II) I810(0): 8411620: Memory at offset 0x00000000, size 0 kBytes
(II) I810(0): 8411648: Memory at offset 0x00000000, size 0 kBytes
(II) I810(0): 851198c: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 8420c28: Memory at offset 0x007af000, size 64 kBytes
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
...
(EE) AIGLX: Screen 0 is not DRI capable
...
--------------------------------------------------------------------------
Looks like bug 6511711 hasn't really been fixed... still running on 8 MB of
VideoRam here...
Any advice?
This message posted from opensolaris.org
