Thank you very much for help Janek.
I confirm that I could compile trunk on ubuntu18 with CGAL, without
special steps (not even dpkg, just cmake+make without options).
For DEM-PFV-check.py the problem is with the cholmod solver. I'll try
and fix that.
@Robert, you mentioned that by-passing the eigen interface to use
cholmod directly solved issues on your side IIRC.
Could you give more hints about that, do you have some candidate code
for commit?
Cheers
Bruno
On 02/11/2018 12:33 PM, janek_li...@wp.pl wrote:
OK, so I did the initial commit for cgal 4.11, the most importatnt
stuff is in the commit message. I will repeat it here in short:
1. maybe the #ifdefs that I added in
lib/triangulation/RegularTriangulation.h are not necessary?
2. the ALPHASHAPES changes inlib/triangulation/Tesselation.h are not
related to cgal, but I couldn't compile without this.
3. In checkPolyhedraCrush.py this python line freezes:
O.run(250, True); checkForcesBodies(25.44893, 4)
Moreover:
4. with this patch yade is compiling successfully with cgal 4.9 and 4.11.
5. regardless of cgal version (with 4.9 and 4.11) I have this error
in DEM-PFV-check.py:
running: DEM-PFV-check.py
DEM-PFV: unbalanced Qin vs. Qout ( -0.00279199571618 vs. 0.0 )
DEM-PFV: difference in permeability: 27.9199571618 vs. target
0.040399916554
The difference is more, than the critical tolerance!
DEM-PFV: difference in final pressure: 0.0 vs. target 628.314160434
The difference is more, than the critical tolerance!
DEM-PFV: difference in final deformation -0.00430506304298 vs.
target -0.00258113045083
The difference is more, than the critical tolerance!
Status: FAILURE!!!
Since it does not depend on cgal version, it must be some other
library that I have on my workstation. I have here installed devuan
ascii, and I only backported cgal 4.11 from devuan ceres. All other
libraries are at their default devuan ascii version.
6. Also yade version is clean, right from github :) Just to make it
all clear. However I could not compile yade just by doing the usual
cd .. ; mkdir build ; cd build
cmake -DCMAKE_INSTALL_PREFIX=../install ../trunk -DDEBUG=1 -DCHUNKSIZE=5
time nice -n 20 make install -j 20 ; xmessage "\nFinished\n"
I had some boost errors related to the C++11 declytype support, eg. as
discussed in:
http://www.boost.org/doc/libs/1_66_0/libs/utility/utility.htm
At first I was worried that g++ 6.3 is too old. However I found out
that I can compile yade 2018-02 if I copy the ./debian/ directory from
yade 2017-01 and do:
time dpkg-buildpackage -rfakeroot -b -j30
So it must not be related to compiler version, but rather to compiler
flags. And Anton fixed this in debian/ build rules, while my command
could not make it correctly. I didn't figure this out yet. Last night
I was simply building yade 2018-02 with debian/ from yade 2017-01 :)
best regards
Janek
Dnia 9 lutego 2018 18:46 Anton Gladky <gladky.an...@gmail.com
<mailto:gladky.an...@gmail.com>> napisał(a):
Yes, it should be OK.
Anton
2018-02-09 16:06 GMT+01:00 Bruno Chareyre
<bruno.chare...@grenoble-inp.fr
<mailto:bruno.chare...@grenoble-inp.fr>>:
What is an appropriate system to try this? ubuntu 18.04 beta
is ok?
B
On 02/08/2018 07:35 PM, Janek Kozicki (yade-dev) wrote:
Hi Anton and Bruno,
I am glad that I can help, and use this opportunity to get
back in track
;) So I will do this entire Saturday after I get back home
on friday night.
Should I work on latest yade trunk?
BTW: I'm writing this from an airport ;)
Best regards,
Janek
On 8 Feb 2018, 19:10 +0100, Anton Gladky
<gladky.an...@gmail.com <mailto:gladky.an...@gmail.com>>,
wrote:
Hi Bruno,
CGAL_ 4.11 is the only version now for Debian
(testing) [1]
and upcoming Ubuntu 18.04 [2]. The shipped Yade does
not support CGAL due to compilation problems.
I am preparing the new Yade upload, but we have a chance
to patch the Yade within the next two weeks or prepare
the 2018.02b release with CGAL-support and upload it.
[1] https://tracker.debian.org/pkg/cgal
[2] https://launchpad.net/ubuntu/+source/cgal
Anton
2018-02-08 18:45 GMT+01:00 Bruno Chareyre
<bruno.chare...@grenoble-inp.fr
<mailto:bruno.chare...@grenoble-inp.fr>>:
Hi Anton,
Thank you very much.
I'm not so sure what we are speaking about here.
Yade 2018.02a is the candidate source code for
producing a binary
yade-stable in Ubuntu 18.04, correct (approximately)?
If yes, can we build yade-stable with CGAL at the
moment?
Bruno
On 02/08/2018 06:35 PM, Anton Gladky wrote:
Well, if we find a way to fix it within the
next 2 weeks,
I think there is a chance to get it pushed
into Debian->Ubuntu.
Regards
Anton
2018-02-08 15:23 GMT+01:00 Bruno Chareyre
<bruno.chare...@grenoble-inp.fr
<mailto:bruno.chare...@grenoble-inp.fr>>:
On 02/07/2018 05:35 PM, Janek Kozicki
(yade-dev) wrote:
Regarding compiling yade with CGAL
4.11, I can look into it on
Saturday,
if my last patches didn't work for you?
I did not test it yet I'm afraid. :-/
It sounds like a critical issue for a
18.04 release. Is it?
Would that mean to skip the whole CGAL
related code in the binary
release?
I'll go back to this asap, thanks for pinging.
Bruno
_______________________________________________
Mailing list:
https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
Post to : yade-dev@lists.launchpad.net
<mailto:yade-dev@lists.launchpad.net>
Unsubscribe :
https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
More help :
https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
Post to : yade-dev@lists.launchpad.net
<mailto:yade-dev@lists.launchpad.net>
Unsubscribe : https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
Post to : yade-dev@lists.launchpad.net
<mailto:yade-dev@lists.launchpad.net>
Unsubscribe : https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
Post to : yade-dev@lists.launchpad.net
<mailto:yade-dev@lists.launchpad.net>
Unsubscribe : https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
Post to : yade-dev@lists.launchpad.net
<mailto:yade-dev@lists.launchpad.net>
Unsubscribe : https://launchpad.net/~yade-dev
<https://launchpad.net/%7Eyade-dev>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
Post to : yade-dev@lists.launchpad.net
Unsubscribe : https://launchpad.net/~yade-dev
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~yade-dev
Post to : yade-dev@lists.launchpad.net
Unsubscribe : https://launchpad.net/~yade-dev
More help : https://help.launchpad.net/ListHelp
