New question #258445 on Yade: https://answers.launchpad.net/yade/+question/258445
Dear Prof. Chareyre and all users: Thanks for helping me last time. Today I find some strange things unexpectedly in my running codes. As you know, I used 2D simulation codes to model the localization (shearing bands) phenomena formerly with given psd data and there was nothing wrong. But this is not a complete task, real experimental methods for building the plain strain condition (psc) are always like that just in Ref.[1]. While 2D state is just an idealized mechanical state and can provide a clear visualization of the formation and evolution of such a narrow band but it should be noticed that it non-real situations can give almost no help to define those important geometrical attributes or statistical parameters to capture and trace the actual bands in lab, such as local ratio void. So it is significant to get some 3D running with psc, which is an easy task in YADE using stress or strain rate controlling methods. But some strange things occur in this stage. My simulation codes seem not to permit all the types of psd date. I use two groups of psd data named psd-1 and psd-2 respectively. The ratio of the min radii of particle with the max is very small in psd-1 and that in psd-2 is almost equal to 1.When the simulation is running with psd-1, YADE cannot recognize the basic geometrical parameters and the unbalance force, just like Fig.1. But when it is replaced by psd-2, there is nothing wrong, just like Fig.2. The only difference between the two is just in psd data. These two data can be adopted perfectly in 2D simulation. The py codes are so long that I can only give them to your E-mail with all the simulation condition data. please help me to check them at once (my YADE vision is 1.10 daily and before running, please make sure that the determined psd data is renamed by ’psd.txt’ ) Seeking your help! Fig.1 http://s1287.photobucket.com/user/fzgkkk/media/01_zpsda27d293.png.html Fig.2 http://s1287.photobucket.com/user/fzgkkk/media/02_zps1df49a2c.png.html Ref. [1] Desrues, J., Lanier, J., Stutz, P., 1985. Localization of the deformation in tests on sand sample. Eng. Fract. Mech. 21, 909– 921. -- You received this question notification because you are a member of yade-users, which is an answer contact for Yade. _______________________________________________ Mailing list: https://launchpad.net/~yade-users Post to : [email protected] Unsubscribe : https://launchpad.net/~yade-users More help : https://help.launchpad.net/ListHelp
