Question #694513 on Yade changed:
https://answers.launchpad.net/yade/+question/694513

    Status: Answered => Open

Defri is still having a problem:
I am sorry for the delay response.

>  If you run it in Yade, you should not have any problem.

yes I run it in YADE, and as you can see in my script and if you run it,
it is fine.

>  I suggest to use yade for yade tasks and paraview for paraview tasks.

I just click "Run Script" in paraview, and then appeared that " NameError: name 
'readParamsFromTable' is not defined "
I am using vtkRecorder

> you should describe more in detail how you got this error, what steps
you did, what commands run, where (linux console, paraview python shell,
...), etc.

So I just run my script in TERMINAL of Ubuntu. I knew about
"readParamsFromTable" from the example, because it showed what I need,
which is the grains and the variation of size of the grains, then I
followed it.

###SCRIPT###

##Sphere Cylinder pack
readParamsFromTable(maxLoad=10000,minLoad=0)
from yade.params.table import *
from yade import export
from yade import pack, plot
from pylab import rand #for sand color

O.bodies.append(geom.facetCylinder(Vector3(1,1,25),4,50,wallMask=6))

##Define material of the grains
O.bodies[0].state.blockedDOFs='xyzXYZ'
O.bodies[0].state.vel=(0,0,0)
O.materials.append(FrictMat(young=1e7,poisson=.3,density=2000,frictionAngle=18))

sp=pack.SpherePack()
sp.makeCloud((-1.6,2.6,.1),(3,-1,20),rMean=.3,rRelFuzz=.5,num=950,)
sp.toSimulation(color=(0.6+0.15*rand(),0.5+0.15*rand(),0.15+0.15*rand()))

##Make a floor
O.bodies.append(wall((0,0,0),axis=2))

##Engines and Constitutive Law
O.engines=[ForceResetter(),
        
InsertionSortCollider([Bo1_Sphere_Aabb(),Bo1_Facet_Aabb(),Bo1_Wall_Aabb()]), 
#move for sphere, facet, wall
        
InteractionLoop([Ig2_Sphere_Sphere_ScGeom(),Ig2_Facet_Sphere_ScGeom(),Ig2_Wall_Sphere_ScGeom()],
 #interaction between them
   [Ip2_FrictMat_FrictMat_FrictPhys()], # ip2 list (just one list!)
   [Law2_ScGeom_FrictPhys_CundallStrack()]), # law2 list
   NewtonIntegrator(damping=.3,gravity=[0,0,-9.81]),
   PyRunner(command='checkUnbalanced()',realPeriod=2,label='checker'),
   VTKRecorder(fileName='tes2',recorders=['all'],iterPeriod=500),]

O.dt=.8*PWaveTimeStep()

def checkUnbalanced():
        if O.iter<1000:return # at the very start, unbalanced force can be low 
as there is only few contacts, but it does not mean the packing                 
                                                         is stable
        if unbalancedForce()>1:return   # the rest will be run only if 
unbalanced is < 1 (stabilized packing)
        O.bodies.append([utils.sphere(center=(1,1,50),radius=3.4)])
        O.bodies[0].state.mass=2000
        
O.materials.append(FrictMat(young=100e7,poisson=.2,density=2700,frictionAngle=20))
        global boulder # without this line, the BOULDER variable would only 
exist inside this function
        boulder=O.bodies[-1]    # the last particles is the boulder
        boulder.state.vel=(0,0,-.1) # start plotting the data now, it was not 
interesting before
        O.engines=O.engines+[PyRunner(command='addPlotData()',iterPeriod=50)]
        checker.command='unloadBoulder()'

def unloadBoulder():
        if abs(O.forces.f(boulder.id)[2])>maxLoad:
                boulder.state.vel*=-1 # prescribing a velocity will therefore 
make it move at constant velocity (downwards)
                checker.command='stopUnloading()'

def stopUnloading():
        if abs(O.forces.f(boulder.id)[2])<minLoad:
                O.run()
                
def addPlotData():
                b=O.bodies[-1]
accel=Force/O.bodies[0].state.mass, Force=Force, itera_=O.iter)
                plot.addData(position=b.state.pos[2], 
velocity=b.state.vel.norm(), itera=O.iter, time=O.time, time_=O.time, 
accel=Force/O.bodies[0].state.mass, Impact_Force=Force, itera_=O.iter)
                
plot.plots={'time':('velocity',), 'itera':('position',), 'time_':('accel',), 
'itera_':('Impact_Force')}
plot.plot()

O.saveTmp()

########################################################################

my another question:
why after I inputted vtkRecorder (as written on my script), only showed the 
initial condition (that only grains stand, not dropping like when I run Yade)?
I want to have the result of the stress (boulder dropped onto the grains).

Thank you in advance.

-- 
You received this question notification because your team yade-users is
an answer contact for Yade.

_______________________________________________
Mailing list: https://launchpad.net/~yade-users
Post to     : [email protected]
Unsubscribe : https://launchpad.net/~yade-users
More help   : https://help.launchpad.net/ListHelp

Reply via email to