Question #696060 on Yade changed:
https://answers.launchpad.net/yade/+question/696060
Description changed to:
Dear All
I am trying to simulate 3 circles of stress plates that have radius
dimension gradually, which has relation with contact force and the area
of each circle.
In order to apply the force that corresponds to each area of circles, I
need to have 3 stress plates with radius 0.5,1, and 2 in XY plane in the
center of the facet.
How can I add those stress plates and how to make some relations among
of each contact force and the area of circle (stress plate)?
Could you please tell me how to do that?
this is my existing code:
##Sphere Cylinder pack
from yade import pack,plot,utils,export
import math
from pylab import rand #for sand color
O.bodies.append(geom.facetBox((0,0,0),(5,2,1.5),wallMask=31))
sp=pack.SpherePack()
sp.makeCloud((-5,-2,-1.5),(5,2,1.5),rMean=.14,rRelFuzz=.1,num=3000)
sp.toSimulation(color=(0.6+0.15*rand(),0.5+0.15*rand(),0.15+0.15*rand()))
##Define material of the grains
#O.bodies[0]
#[b.shape.radius for b in O.bodies if isinstance(b.shape,Sphere)]
O.bodies[0].state.blockedDOFs='xyzXYZ'
O.bodies[0].state.vel=(0,0,0)
O.materials.append(FrictMat(young=1e7,poisson=.3,density=2700,frictionAngle=18))
##Make a floor
O.bodies.append(wall((0,0,-1.5),axis=2))
##Engines and Constitutive Law
O.engines=[ForceResetter(),
InsertionSortCollider([Bo1_Sphere_Aabb(),Bo1_Facet_Aabb(),Bo1_Wall_Aabb()]),
#move for sphere, facet, wall
InteractionLoop([Ig2_Sphere_Sphere_ScGeom(),Ig2_Facet_Sphere_ScGeom(),Ig2_Wall_Sphere_ScGeom()],
#interaction between them
[Ip2_FrictMat_FrictMat_FrictPhys()], # ip2 list (just one list!)
[Law2_ScGeom_FrictPhys_CundallStrack()]), # law2 list
NewtonIntegrator(damping=.3,gravity=[0,0,-9.81]),
PyRunner(command='checkUnbalanced()',realPeriod=2,label='checker'),
#VTKRecorder(fileName='tes',recorders=['all'],iterPeriod=100),
]
O.dt=.9*PWaveTimeStep()
def checkUnbalanced():
if O.iter<1000:return # at the very start, unbalanced force can be low
as there is only few contacts, but it does not mean the packing
is stable
global boulder #without this line, the BOULDER variable would only
exist inside this function
boulder=O.bodies[0] #the last particles is the boulder
O.materials.append(FrictMat(young=1e8,poisson=0.2,density=2700,frictionAngle=25))
O.bodies.append(utils.sphere(center=(0,0,5),radius=2,color=[0,1,1]))
O.bodies[0].state.mass=2000
checker.command='unloadBoulder()'
def unloadBoulder():
if abs(O.forces.f(boulder.id)[0]):
O.run()
checker.command='stress_rad1()'
O.engines=O.engines+[PyRunner(command='stress_rad1()',iterPeriod=50)]
def stress_rad1():
rad1=O.bodies[3011].shape.radius
b=O.bodies[3011]
area1=pi*rad1**2
area2=pi*((rad1+.8)**2-rad1**2)
area3=pi*((rad1+1.2)**2-(rad1+.8)**2)
ForceP=0
StP=0
ForceP1=0
StP1=0
ForceP2=0
StP2=0
for i in range (10,3009):
m=O.bodies[i]
if(m.state.pos[1]>=-2) and (m.state.pos[1]<=2):
if (m.state.pos[0]>=-1) and (m.state.pos[0]<=1) and
(m.state.pos[2]<-.5):
if
(m.state.pos[0]**2+m.state.pos[1]**2)**.5<=rad1: #1st area
ForceP=abs(O.forces.f(m.id)[2])
StP=ForceP/area1
if
((m.state.pos[0]**2+m.state.pos[1]**2)**.5<=rad1+.8) and
((m.state.pos[0]**2+m.state.pos[1]**2)**.5>rad1): #2nd area
ForceP1=abs(O.forces.f(m.id)[2])
StP1=ForceP1/area2
if
((m.state.pos[0]**2+m.state.pos[1]**2)**.5<=rad1+1.2) and
((m.state.pos[0]**2+m.state.pos[1]**2)**.5>rad1+.8): #3rd area
ForceP2=abs(O.forces.f(m.id)[2])
StP2=ForceP2/area3
if O.iter>1000:
plot.addData(z=b.state.pos[2],Stress=StP,Stress1=StP1,Stress2=StP2,i=O.iter,t=O.time)
globals().update(locals())
plot.plots={'i':('z'),'t':('Stress','Stress1','Stress2')}
plot.plot(subPlots=True)
O.saveTmp()
THANK YOU IN ADVANCE.
--
You received this question notification because your team yade-users is
an answer contact for Yade.
_______________________________________________
Mailing list: https://launchpad.net/~yade-users
Post to : [email protected]
Unsubscribe : https://launchpad.net/~yade-users
More help : https://help.launchpad.net/ListHelp
