Public bug reported: Hello.
The Installation page for Pike (Ubuntu 17.10) still has reference to ifup/down methods for setting network interfaces, Ubuntu 17.10 has gone with netplan. Here is a submission for an update to this page https://docs.openstack.org/neutron/pike/install/environment-networking- controller-ubuntu.html (Section 2) . uggested update for neutron/pike/install/environment-networking- controller-ubtuntu.html For 17.10 (w/netplan) Replace 2. with: Ubuntu 17.10 uses netplan not ifup/down, so you must etc /etc/netplan/XX-netplan-file.yaml for your system - Edit /etc/netplan/50-cloud-init.yaml (on my system) file to contain the following: <code> # This file is generated from information provided by # the datasource. Changes to it will not persist across an instance. # To disable cloud-init's network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: version: 2 ethernets: eth0: dhcp4: true match: macaddress: 00:XX:XX:XX:XX:XX addresses: [10.0.0.11/24] gateway4: 10.0.0.1 nameservers: addresses: [8.8.8.8,8.8.4.4] set-name: eth0 eth1: dhcp4: true match: macaddress: 00:XX:XX:XX:XX:XX addresses: [172.16.1.4/24] gateway4: 172.16.1.1 nameservers: addresses: [8.8.8.8,8.8.4.4] set-name: eth1 </code> 1 - Run "netplan generate" to generate that configuration from the file you edited above 2 - Run "netplan apply" to apply the configuration (warning - if you are switching networking and are logged in remotely, you may lose connectivity here - use console instead) This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes: - [X] This doc is inaccurate in this way:Uses Deprecated Commands for Ubuntu 17.10 - [ ] This is a doc addition request. - [X] I have a fix to the document that I can paste below including example: input and output. If you have a troubleshooting or support issue, use the following resources: - Ask OpenStack: http://ask.openstack.org - The mailing list: http://lists.openstack.org - IRC: 'openstack' channel on Freenode ----------------------------------- Release: 11.0.3.dev6 on 2017-11-23 02:11 SHA: b1f71de42ead2c1278343307307984ad1ff00c71 Source: https://git.openstack.org/cgit/openstack/neutron/tree/doc/source/install/environment-networking-controller-ubuntu.rst URL: https://docs.openstack.org/neutron/pike/install/environment-networking-controller-ubuntu.html ** Affects: neutron Importance: Undecided Status: New ** Tags: doc netplan -- You received this bug notification because you are a member of Yahoo! Engineering Team, which is subscribed to neutron. https://bugs.launchpad.net/bugs/1734585 Title: Controller node in neutron - Ubuntu1710 Netplan Status in neutron: New Bug description: Hello. The Installation page for Pike (Ubuntu 17.10) still has reference to ifup/down methods for setting network interfaces, Ubuntu 17.10 has gone with netplan. Here is a submission for an update to this page https://docs.openstack.org/neutron/pike/install/environment- networking-controller-ubuntu.html (Section 2) . uggested update for neutron/pike/install/environment-networking- controller-ubtuntu.html For 17.10 (w/netplan) Replace 2. with: Ubuntu 17.10 uses netplan not ifup/down, so you must etc /etc/netplan/XX-netplan-file.yaml for your system - Edit /etc/netplan/50-cloud-init.yaml (on my system) file to contain the following: <code> # This file is generated from information provided by # the datasource. Changes to it will not persist across an instance. # To disable cloud-init's network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: version: 2 ethernets: eth0: dhcp4: true match: macaddress: 00:XX:XX:XX:XX:XX addresses: [10.0.0.11/24] gateway4: 10.0.0.1 nameservers: addresses: [8.8.8.8,8.8.4.4] set-name: eth0 eth1: dhcp4: true match: macaddress: 00:XX:XX:XX:XX:XX addresses: [172.16.1.4/24] gateway4: 172.16.1.1 nameservers: addresses: [8.8.8.8,8.8.4.4] set-name: eth1 </code> 1 - Run "netplan generate" to generate that configuration from the file you edited above 2 - Run "netplan apply" to apply the configuration (warning - if you are switching networking and are logged in remotely, you may lose connectivity here - use console instead) This bug tracker is for errors with the documentation, use the following as a template and remove or add fields as you see fit. Convert [ ] into [x] to check boxes: - [X] This doc is inaccurate in this way:Uses Deprecated Commands for Ubuntu 17.10 - [ ] This is a doc addition request. - [X] I have a fix to the document that I can paste below including example: input and output. If you have a troubleshooting or support issue, use the following resources: - Ask OpenStack: http://ask.openstack.org - The mailing list: http://lists.openstack.org - IRC: 'openstack' channel on Freenode ----------------------------------- Release: 11.0.3.dev6 on 2017-11-23 02:11 SHA: b1f71de42ead2c1278343307307984ad1ff00c71 Source: https://git.openstack.org/cgit/openstack/neutron/tree/doc/source/install/environment-networking-controller-ubuntu.rst URL: https://docs.openstack.org/neutron/pike/install/environment-networking-controller-ubuntu.html To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1734585/+subscriptions -- Mailing list: https://launchpad.net/~yahoo-eng-team Post to : [email protected] Unsubscribe : https://launchpad.net/~yahoo-eng-team More help : https://help.launchpad.net/ListHelp
