Owen Stampflee wrote:
Yeah, new machines are rather broken again (the new base model G5s haveIt didn't go on there very easily... It kept putting the non-G5 kernel on the machine and I had to go in and make it use the G5 kernel by hand and then I had to disable kudzu. At this point, things sorta worked but the machine would not reboot.
an iMac G5 bridge). We cant figure out how the fans work yet. I'm
surprised YDL 4.0 installed at all.
One of my coworkers loaned my a copy of the 4.0.1 ISOs to try and they seem to work better (i.e. it actually installs byitself), but the fans are still an issue.
Send me /proc/cpuinfo, to make sure it is a new machine.
This is from the 4.0.1 install...
processor : 0 cpu : PPC970FX, altivec supported clock : 1800.000000MHz revision : 3.0
timebase : 33333333 machine : PowerMac9,1 motherboard : PowerMac9,1 MacRISC4 Power Macintosh detected as : 415 (Unknown K2-based) pmac flags : 00000000 pmac-generation : NewWorld
-- Keith Mitchell | | |
_______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
