Hi,
I am trying hook up a Apple Xserve RAID to a Xserve G5 blade, but I just can't get the Fusion MPT Fibre Channel driver to load. I have YDL 4.0 with the 2.6.10 kernel. The Apple Fibre Channel card is installed and the Xserve RAID is attached to the FC card.
I have been following the procedure described in the HOWTO Configure Fibrechannel article (www.yellowdoglinux.com/support/solutions/ydl_4.0/fibrechannel.shtml) step by step, but still can't get it to work. The following is what happened. Has anybody seen a similar problem before? Any help is greatly appreciated!
Many thanks in advance,
Xue
----------------------------------------------------------------------
Fusion MPT base driver 3.01.18
Copyright (c) 1999-2004 LSI Logic Corporation
PCI: Enabling device: (0001:06:02.0), cmd 7
mptbase: Initiating ioc0 bringup
ioc0: FC929: Capabilities={Initiator,Target,LAN}
PCI: Enabling device: (0001:06:02.1), cmd 7
mptbase: Initiating ioc1 bringup
ioc1: FC929: Capabilities={Initiator,Target,LAN}
Fusion MPT SCSI Host driver 3.01.18
scsi4 : ioc0: LSIFC929, FwRev=01000600h, Ports=1, MaxQ=1023, IRQ=52
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error issuing abort task! (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error processing TaskMgmt request (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc0: Recovered from IOC FAULT
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error issuing abort task! (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error processing TaskMgmt request (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc0: Recovered from IOC FAULT
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc0: >> Attempting task abort! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error issuing abort task! (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting target reset! (sc=c000000001c39280)
mptscsih: ioc0: WARNING - Error processing TaskMgmt request (sc=c000000001c39280)
mptscsih: ioc0: >> Attempting bus reset! (sc=c000000001c39280)
mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc0: Recovered from IOC FAULT
scsi5 : ioc1: LSIFC929, FwRev=01000600h, Ports=1, MaxQ=1023, IRQ=52
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error issuing abort task! (sc=c000000001776080)
mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error processing TaskMgmt request (sc=c000000001776080)
mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
mptbase: Initiating ioc1 recovery
mptbase: ioc1: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc1: Recovered from IOC FAULT
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error issuing abort task! (sc=c000000001776080)
mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error processing TaskMgmt request (sc=c000000001776080)
mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
mptbase: Initiating ioc1 recovery
mptbase: ioc1: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc1: Recovered from IOC FAULT
mptbase: ioc0: LogInfo(0x27002712): SubCl={State Change Info}
mptbase: ioc1: LogInfo(0x27002712): SubCl={State Change Info}
mptscsih: ioc1: >> Attempting task abort! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error issuing abort task! (sc=c000000001776080)
mptscsih: ioc1: >> Attempting target reset! (sc=c000000001776080)
mptscsih: ioc1: WARNING - Error processing TaskMgmt request (sc=c000000001776080)
mptscsih: ioc1: >> Attempting bus reset! (sc=c000000001776080)
mptbase: Initiating ioc1 recovery
mptbase: ioc1: WARNING - IOC is in FAULT state!!!
FAULT code = 2712h
mptbase: ioc1: Recovered from IOC FAULT
-------------------------------------------------------------------
_______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
