Hello, I'm attempting to get the Yellow Dog installer up and running on the PowerPC 405 inside a Xilinx Virtex 2 Pro FPGA. I already have a Linux 2.4 kernel from http://ppc.bkbits.net:8080/linuxppc-2.4 running with a BusyBox based ramdisk.image.gz The kernel has ethernet networking and mounts onboard CompactFlash devices.
I substituted the ramdisk.image.gz from http://ydl.osuosl.org/yellowdog-3.0/en/os/images/ and get the output below. I think signal 11 is a segfault which leads me to believe that the installer is accessing some peripheral which isn't in this hardware. There is no video output. Suggestions and ideas welcomed. Thanks. Paul ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [standard Linux boot messages snipped...] Greetings. Yellow Dog install init version 8.0 starting mounting /proc filesystem... done mounting /dev/pts (unix98 pty) filesystem... done Yellow Dog install init version 8.0 using a serial console remember, cereal is an important part of a nutritionally balanced breakfast. could not set new controlling tty checking for NFS root filesystem...no trying to remount root filesystem read write... done checking for writeable /tmp... yes couldn't open /dev/tty4 for syslog -- still using /tmp/syslog running install... running /sbin/loader install exited abnormally -- received signal 11 sending termination signals...done sending kill signals...done disabling swap... unmounting filesystems... /dev/pts done /dev umount failed (16) /proc done you may safely reboot your system _______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
