Here's another question that has me a bit stumped. We've been running 4.0 on our xserves for quite a while now, but during this build the need for a 64 OS has arisen, so that's why I was trying to put 5.0.1 on my xserve. Since I wasn't getting anywhere with that, I went with 4.1. I was able to install it, but only by using a cheap-o video card and keyboard, not over a serial port. Now, even though I have the xserve set to boot to run level 3, it always seems to take control away from the serial port and tries to pass it to a video card during the boot up process. I can ssh in fine and machine is working as expected, but I need to have serial console access. Any ideas or suggestions on what I'm doing wrong?
Thanks! Joshua A. Richardson Senior Systems Engineer [EMAIL PROTECTED] (703) 272-1761 -- Office (540) 383-9093 -- Cell
BEGIN:VCARD VERSION:2.1 N:Richardson;Joshua FN:Richardson, Joshua ORG:MDS - DSRS TEL;WORK;VOICE:703-272-1761 ADR;WORK:;VAFF07 LABEL;WORK:VAFF07 EMAIL;PREF;INTERNET:[EMAIL PROTECTED] REV:20060104T162756Z END:VCARD
_______________________________________________ yellowdog-general mailing list [email protected] http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general HINT: to Google archives, try '<keywords> site:terrasoftsolutions.com'
