Also anouther little known trick that usually works. When you turn on the
unit hold down the mouse button until the CD pops out. This will ususally
work with any slot loading iMac.
Christopher Rosado writes:
John-
Have you tried the eject button that is on the drive itself? If I'm not
mistaken, you should see what seems to be a pinhole on the right hand
side of the CD drive (slot-loading). There is a similar hole on the tray
loading drives that were in the early iMacs (233) but I don't recall
where. I want to say somewhere around the eject button you'd normally
press.- Have a paper clip handy, reboot and immediately insert the paper
clip into that pinhole. You should feel the eject button depress. If your
timing is right, the disk should pop out.
HTH,
--Christopher
On May 22, 2005, at 8:03 AM, <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> wrote:
I am trying to install YDL 4.0.1 on an iMac - 350 Mhz. It got to the
second CD and then gave me a blank screen with a symbol for a file with
a flashing question mark in it.
I have disconnected all the peripherals and have tried rebooting but all
I get is the same symbol. I can't even get the cd out. Anybody help,
please.
John Vile
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
_______________________________________________
yellowdog-newbie mailing list
[email protected]
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
