Hello Quentin,I made the change that you recommended (see below) and the Rpi3B+ booted without displaying the dmesg output only Please wait: booting... vidal@ws009:~/wkg/yocto-zeus-3.0/poky/meta-raspberrypi$ git diffdiff --git a/conf/machine/raspberrypi3.conf b/conf/machine/raspberrypi3.confindex 581e47c..43a0a25 100644--- a/conf/machine/raspberrypi3.conf+++ b/conf/machine/raspberrypi3.conf@@ -18,3 +18,4 @@ UBOOT_MACHINE = "rpi_3_32b_config" SERIAL_CONSOLES ?= "115200;ttyS0" ARMSTUB ?= "armstub7.bin"+ENABLE_UART = "1" My meta-raspberrypi ver ed6b75ba6, I believe was the current version.How does this modification get updated in meta-raspberrypi? The ethernet did not get set at boot. I needed to execute "ifup eth0".In addition the hostname was not seen by router.The dmesg outout is at my github.https://github.com/develone/raspberrypi2_yocto-zeus/blob/master/doc/first-rpi3-build/firstbootdmesg.txtLet me know if I can provide additional information.Thanks
Edward Vidal Jr. e-mail devel...@sbcglobal.net 915-595-1613 On Wednesday, December 4, 2019, 1:16:38 AM MST, Quentin Schulz <quentin.sch...@streamunlimited.com> wrote: Hi Ed, On Wed, Dec 04, 2019 at 12:24:31AM +0000, Ed Vidal wrote: > Hello all,I am testing a zeus rpi3. Any and all help is appreciated. > I created a rpi2 core-image-minimal and built a micro sd card.which booted > okay.I then modified the build/conf/local.conf file for a raspberrypi3. > The rpi3 core-image-minimal does not boot to login prompt.This is the output > as it is booting[ 3.27169] lan78xx 1-1.1.1:-mdiobus: probed[ 20.921838] > raddom: crng init done[ 20.926490] radom: 3 urandom warning(s) missed due > to ratelimiting > see the jpeg file doc/rpi3fails.jpeg in repo > https://github.com/develone/raspberrypi2_yocto-zeus > devel@mypi3-15:~/raspberrypi2_yocto-zeus $ diff raspberrypi2/conf/local.conf > raspberrypi3/conf/local.conf 39c39< MACHINE ??= "raspberrypi2"---> MACHINE > ??= "raspberrypi3" > devel@mypi3-15:~/raspberrypi2_yocto-zeus $ diff > raspberrypi2/conf/bblayers.conf raspberrypi3/conf/bblayers.conf > Let me know if I can provide any additional information. I think you might be missing `ENABLE_UART = "1"`. We have it in local.conf but I think you should be able to put it in your machine conf file or in your distro conf file if you can't modify local.conf persistently. C.f.: http://git.yoctoproject.org/cgit.cgi/meta-raspberrypi/tree/docs/extra-build-config.md?h=zeus#n228 BR Quentin
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#47557): https://lists.yoctoproject.org/g/yocto/message/47557 Mute This Topic: https://lists.yoctoproject.org/mt/66117572/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-