Hi Kem, I had figured out your suggestions, my problem is how do I generate the "<your-image>" image in:
INITRAMFS_IMAGE_rpi = "<your-image>" I need a recipe for the image and a way to get Yocto to build it when I build the rest of my image. Maybe specifying the name will build it, but I still need a recipe for the image. Regards, Greg -----Original Message----- From: Khem Raj <[email protected]> Sent: Thursday, January 23, 2020 10:56 AM To: Greg Wilson-Lindberg <[email protected]> Cc: Yocto list discussion <[email protected]> Subject: Re: [yocto] generate initramfs for raspberry pi On Thu, Jan 23, 2020 at 10:44 AM Greg Wilson-Lindberg <[email protected]> wrote: > > Hello List, > > I have not been able to figure out how to generate an initramfs image for a > raspberry pi build of yocto. I’ve searched it web and have not found anything > that mentions generating the actual image, lots of hits on how to configure > using the initramfs, but not on generating it. Is there a standard recipe for > a raspberry pi initramfs and how would I enable its generation, or maybe I’m > just being clueless. > > > > I’m running on a boot2qt build of yocto based on Qt v5.14.0 that uses warrior > and I’m targeting an RPi 4 using u-boot. > > > > Any help would be greatly appreciated. > try something like below in local.conf INITRAMFS_IMAGE_BUNDLE_rpi = "1" INITRAMFS_IMAGE_rpi = "<your-image>" # Enlarge boot partition to 1GiB BOOT_SPACE = "1073741" INITRAMFS_MAXSIZE = "315400" IMAGE_FSTYPES_pn-${INITRAMFS_IMAGE} = "${INITRAMFS_FSTYPES}" > > > Best regards, > > Greg Wilson-Lindberg > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#48111): https://lists.yoctoproject.org/g/yocto/message/48111 Mute This Topic: https://lists.yoctoproject.org/mt/70053252/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
