Hi, I'm using a yocto warrior image with connman and trying to configure the default IPs in an image. I have a device with 2 ethernet NICs and a wifi adapter.
I need to set 2 static IPs on the NICs, then user can connect to a known IP and change the setting form a webUI Is there a way to set default IPs other than writing this file: /var/lib/connman/ethernet_*_cable/settings where * is the NIC MAC without 's Also accessing interfaces by MAC instead of device name is quite cumbersome because MACs change from one device to another... Any tricks on how this could be eased? Finally, is there a way to set the MTU with connman. I can't find anything about that. Thanks, -Damien
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#48137): https://lists.yoctoproject.org/g/yocto/message/48137 Mute This Topic: https://lists.yoctoproject.org/mt/70071139/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
