I'm working with NXP iMX8QXPMEK evaluation board. I downloaded bsp release L4.19.35_1.1.0_MX8QXP from following site: https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/embedded-linux-for-i.mx-applications-processors:IMXLINUX?tab=Design_Tools_Tab This bsp release is for Yocto Project 2.7 (Warrior) I built yocto project for this bsp release. I copied built image into sd card and then booted NXP board from sd card. I need to step through USB Host Subsystem source code running in embedded linux kernel? There is a serial connection between my NXP evaluation board and my PC. Micro-USB Debug port in NXP board is connected to USB port in my PC. How do I setup debugging environment so I can see source code and symbols running in my NXP board?
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group.
View/Reply Online (#48539): https://lists.yoctoproject.org/g/yocto/message/48539 Mute This Topic: https://lists.yoctoproject.org/mt/71432780/21656 Mute #toolchain: https://lists.yoctoproject.org/mk?hashtag=toolchain&subid=6691583 Mute #yocto: https://lists.yoctoproject.org/mk?hashtag=yocto&subid=6691583 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-