I meant to say "zeus" was released in October 2019. I'm sure xilinx support was after that.
On Fri, Apr 24, 2020 at 8:00 PM Tim Orling <[email protected]> wrote: > > I see you are building for "rocko" and that your layer supports "sumo" and > "rocko". Do you have a strong compelling reason to stay on these EOL > releases? meta-xilinx has a zeus branch which was released in October 2019 > and has newer components and will be easier for you and us to support. > (We've had "thud" and "warrior" releases in-between, so that's at least a > year and a half ahead of your code base). > > I started trying to build your layer (on "zeus" release), but > unfortunately you have recipes fetching from internal CERN git repos that > are not accessible to the rest of us. > > Here's what I have so far: > https://github.com/moto-timo/meta-l1calo/tree/timo/zeus/add/opcServer > > Again, I can't go much further because I can't fetch from your internal > repos. > > On Fri, Apr 24, 2020 at 6:38 PM Khem Raj <[email protected]> wrote: > >> >> >> On 4/24/20 4:17 PM, Emily wrote: >> > Hi all - >> > >> > I'm trying to build an OS with a custom recipe >> > ( >> https://github.com/kratsg/meta-l1calo/blob/add/opcServer/recipes-core/opc-ua/opc-ua-server-gfex_git.bb >> ). >> > I can build it as-is in the link above, but when actually trying to use >> > the output of the recipe (Poverty.so) I get the below error in python3: >> > >> >>>> import Poverty Traceback (most recent call last): File "<stdin>", >> line 1, in <module> ImportError: /usr/bin/Poverty.so: undefined symbol: >> _ZN5boost6python6detail11init_moduleEPKcPFvvE >> > >> > >> > I think that's because I built against python2 in some places. So I >> > replaced essentially all of the python dependencies with their >> > corresponding python3 dependencies, but that gives a build error in >> > bitbake like: >> > >> > | >> /local/d6/easmith5/rocko_bitbake/poky/build/tmp/work/aarch64-poky-linux/opc-ua-server-gfex/1.0+gitAUTOINC+921c563309-r0/recipe-sysroot/usr/include/boost/python/detail/wrap_python.hpp:50:11: >> fatal error: pyconfig.h: No such file or directory >> > | # include <pyconfig.h> >> > | ^~~~~~~~~~~~ >> > | compilation terminated. >> > >> > >> > However, I checked and the offending file pyconfig.h is actually present >> > at | >> > >> /local/d6/easmith5/rocko_bitbake/poky/build/tmp/work/aarch64-poky-linux/opc-ua-server-gfex/1.0+gitAUTOINC+921c563309-r0/recipe-sysroot/usr/include/python3.5m/. >> > When I build with python2 dependencies the file is in the same location, >> > just /python2.7/. >> > >> > I can't quite tell if this is a yocto problem, or a problem with my >> > recipe and/or build files for that recipe. If anyone has suggestions >> > they would be much appreciated! >> >> this seems to be that it is needing python2, so yes it can perhaps be >> ported to py3 but you might have to check if it needs some code changes >> >> Looking at the recipe it is ineheriting py2 class here [1] >> >> perhaps you should change that to python3native >> >> [1] >> >> https://github.com/kratsg/meta-l1calo/blob/add/opcServer/recipes-core/opc-ua/opc-ua-server-gfex_git.bb#L15 >> >> >> >> > >> > Thanks! >> > Emily Smith >> > >> > >> > >> > >> >> >> >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#49233): https://lists.yoctoproject.org/g/yocto/message/49233 Mute This Topic: https://lists.yoctoproject.org/mt/73253613/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
