You should have core-image-base-raspberrypi3.rpi-sdimg this should be
written to to the SD card. Please check it by following below steps. Hope
this help you.
then follow below steps to write the image on SD card.
SD_image writing
In build directory :
to check the sdimage for installing on SD card.
ls tmp/deploy/images/raspberrypi3/core-image-base-raspberrypi3.rpi-sdimg
plug sd card to pc then
$: lsblk
$: sudo umount /dev/sdb*
$: sudo dd
if=tmp/deploy/images/raspberrypi3/core-image-base-raspberrypi3.rpi-sdimg
of=/dev/sdb bs=4M
>> This task will take some time and at the end we will get the output
something similar to below :
46+0 records in
46+0 records out
192937984 bytes (193 MB, 184 MiB) copied, 10.2155 s, 18.9 MB/s
$: sync
$: sudo umount /dev/sdb*
Best Regards,
Siddhartha V
On Fri, May 29, 2020 at 12:48 PM Pankaj Vinadrao Joshi <
[email protected]> wrote:
> Hi,
> I have built the image for raspberrypi4 and i have got the following
> images
>
>
> core-image-minimal.env
>
> rpi-ft5406-1-4.19.120+git0+9da67d7329-r0-raspberrypi4-20200521111428.dtbo
> core-image-minimal-raspberrypi4-20200518130120.rootfs.ext3
> rpi-ft5406.dtbo
> core-image-minimal-raspberrypi4-20200518130120.rootfs.manifest
> rpi-ft5406-raspberrypi4.dtbo
>
> core-image-minimal-raspberrypi4-20200518130120.rootfs.tar.bz2
> rpi-hwup-image.env
>
> core-image-minimal-raspberrypi4-20200518130120.rootfs.wic.bmap
> rpi-hwup-image-
>
> raspberrypi4-20200521111428.rootfs.ext3
>
> core-image-minimal-raspberrypi4-20200518130120.rootfs.wic.bz2
> rpi-hwup-image-
>
> raspberrypi4-20200521111428.rootfs.manifest
>
> core-image-minimal-raspberrypi4-20200518130120.testdata.json
> rpi-hwup-image-
>
> raspberrypi4-20200521111428.rootfs.tar.bz2
>
> core-image-minimal-raspberrypi4.ext3
> rpi-hwup-image-raspberrypi4-
>
> 20200521111428.rootfs.wic.bmap
>
> core-image-minimal-raspberrypi4.manifest
> rpi-hwup-image-raspberrypi4-
>
> 20200521111428.rootfs.wic.bz2
>
> core-image-minimal-raspberrypi4.tar.bz2
> core-image-minimal-raspberrypi4.testdata.json
>
> core-image-minimal-raspberrypi4.wic.bmap
>
>
> core-image-minimal-raspberrypi4.wic.bz2
>
> and i am trying to copy core-image-minimal-raspberrypi4.wic.bz2* by
> using*
>
> *$sudo dd if=core-image-minimal-raspberrypi4.wic.bz2 of=/dev/sdb *
>
> but my image is not getting copied into sd card(used two sd cards ,tried
> formatting with FAT,Linux),i am missing anything ,do i need to copy
> anything else with this core-image-minimal.
> which extension of image i should use to bringup my RPI4??
>
> Thanks!
>
>
--
Thanks and Regards.
Siddhartha V.
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#49527): https://lists.yoctoproject.org/g/yocto/message/49527
Mute This Topic: https://lists.yoctoproject.org/mt/74539072/21656
Mute #yocto: https://lists.yoctoproject.org/mk?hashtag=yocto&subid=6691583
Mute #linux: https://lists.yoctoproject.org/mk?hashtag=linux&subid=6691583
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
