Dear all,
When I try to add the overlay for the sc16is752-spi0 to my image, it fails at
the task do_image_wic with the following error:
| ERROR: Malformed boot file entry: sc16is752-spi0.dtbo;
I am using the kernel provided by meta-raspberrypi and add the following to my
board configuration:
RPI_KERNEL_DEVICETREE_OVERLAYS += " \
overlays/uart0.dtbo \
overlays/sc16is752-spi0.dtbo \
overlays/sdio.dtbo \
overlays/i2c-rtc.dtbo \
"
I was not able to find anything on this error.
Thank you.
Best regards
Romain
________________________________
Romain Crausaz
Development
DIGI SENS Switzerland AG
Freiburgstr. 65
CH-3280 Murten
Telefon: +41 26 672 9876
Email: [email protected]<mailto:[email protected]>
[cid:digisens_34df8dfe-0639-4acb-9e8d-0efd75e7b3a8.png]
www.digisens.ch<http://www.digisens.ch>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#51716): https://lists.yoctoproject.org/g/yocto/message/51716
Mute This Topic: https://lists.yoctoproject.org/mt/78879953/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
