there is KERNEL_MODULE_AUTOLOAD which could be used to load modules on boot, don't know if that suffices to what you need but worth looking into.
On Tue, Apr 6, 2021 at 12:47 PM Monsees, Steven C (US) via lists.yoctoproject.org <[email protected]> wrote: > > > > Working with zeus, aarch64, with Xilinx vivado dependencies… > > Kerenl image and bootapp build and run correctly, need to be able to build > EXT SDK,,, > > > > How do I incorporate the dependencies of the low level Xilinx FPGA support > (i.e. “vivado”) into the Ext SDK build env ? > > > > Is there a way to build in support so that the “module load” command would be > usable from the “.conf” or the env-setup script, (i.e. “module load vivado…” > ? > > > > Thanks, > > Steve > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#53035): https://lists.yoctoproject.org/g/yocto/message/53035 Mute This Topic: https://lists.yoctoproject.org/mt/81899470/21656 Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto Mute #sdk:https://lists.yoctoproject.org/g/yocto/mutehashtag/sdk Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
