Signed-off-by: Armin Kuster <[email protected]> --- .../Fixed-swig-host-contamination-issue.patch | 57 ------- .../audit/audit/audit-volatile.conf | 1 - recipes-security/audit/audit/auditd | 153 ------------------ recipes-security/audit/audit/auditd.service | 28 ---- recipes-security/audit/audit_3.0.1.bb | 109 ------------- 5 files changed, 348 deletions(-) delete mode 100644 recipes-security/audit/audit/Fixed-swig-host-contamination-issue.patch delete mode 100644 recipes-security/audit/audit/audit-volatile.conf delete mode 100644 recipes-security/audit/audit/auditd delete mode 100644 recipes-security/audit/audit/auditd.service delete mode 100644 recipes-security/audit/audit_3.0.1.bb
diff --git a/recipes-security/audit/audit/Fixed-swig-host-contamination-issue.patch b/recipes-security/audit/audit/Fixed-swig-host-contamination-issue.patch deleted file mode 100644 index 740bcb5..0000000 --- a/recipes-security/audit/audit/Fixed-swig-host-contamination-issue.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 3d13f92c1bb293523670ba01aea7e655b00a6709 Mon Sep 17 00:00:00 2001 -From: Li xin <[email protected]> -Date: Sun, 19 Jul 2015 02:42:58 +0900 -Subject: [PATCH] audit: Fixed swig host contamination issue - -The audit build uses swig to generate a python wrapper. -Unfortunately, the swig info file references host include -directories. Some of these were previously noticed and -eliminated, but the one fixed here was not. - -Upstream-Status: Inappropriate [embedded specific] - -Signed-off-by: Anders Hedlund <[email protected]> -Signed-off-by: Joe Slater <[email protected]> -Signed-off-by: Yi Zhao <[email protected]> ---- - bindings/swig/python3/Makefile.am | 3 ++- - bindings/swig/src/auditswig.i | 2 +- - 2 files changed, 3 insertions(+), 2 deletions(-) - -diff --git a/bindings/swig/python3/Makefile.am b/bindings/swig/python3/Makefile.am -index dd9d934..61b486d 100644 ---- a/bindings/swig/python3/Makefile.am -+++ b/bindings/swig/python3/Makefile.am -@@ -22,6 +22,7 @@ - CONFIG_CLEAN_FILES = *.loT *.rej *.orig - AM_CFLAGS = -fPIC -DPIC -fno-strict-aliasing $(PYTHON3_CFLAGS) - AM_CPPFLAGS = -I. -I$(top_builddir) -I${top_srcdir}/lib $(PYTHON3_INCLUDES) -+STDINC ?= /usr/include - LIBS = $(top_builddir)/lib/libaudit.la - SWIG_FLAGS = -python -py3 -modern - SWIG_INCLUDES = -I. -I$(top_builddir) -I${top_srcdir}/lib $(PYTHON3_INCLUDES) -@@ -36,7 +37,7 @@ _audit_la_DEPENDENCIES =${top_srcdir}/lib/libaudit.h ${top_builddir}/lib/libaudi - _audit_la_LIBADD = ${top_builddir}/lib/libaudit.la - nodist__audit_la_SOURCES = audit_wrap.c - audit.py audit_wrap.c: ${srcdir}/../src/auditswig.i -- swig -o audit_wrap.c ${SWIG_FLAGS} ${SWIG_INCLUDES} ${srcdir}/../src/auditswig.i -+ swig -o audit_wrap.c ${SWIG_FLAGS} ${SWIG_INCLUDES} -I$(STDINC) ${srcdir}/../src/auditswig.i - - CLEANFILES = audit.py* audit_wrap.c *~ - -diff --git a/bindings/swig/src/auditswig.i b/bindings/swig/src/auditswig.i -index 21aafca..dd0f62c 100644 ---- a/bindings/swig/src/auditswig.i -+++ b/bindings/swig/src/auditswig.i -@@ -39,7 +39,7 @@ signed - #define __attribute(X) /*nothing*/ - typedef unsigned __u32; - typedef unsigned uid_t; --%include "/usr/include/linux/audit.h" -+%include "linux/audit.h" - #define __extension__ /*nothing*/ - %include <stdint.i> - %include "../lib/libaudit.h" --- -2.17.1 - diff --git a/recipes-security/audit/audit/audit-volatile.conf b/recipes-security/audit/audit/audit-volatile.conf deleted file mode 100644 index 9cbe154..0000000 --- a/recipes-security/audit/audit/audit-volatile.conf +++ /dev/null @@ -1 +0,0 @@ -d /var/log/audit 0750 root root - diff --git a/recipes-security/audit/audit/auditd b/recipes-security/audit/audit/auditd deleted file mode 100644 index 6aa7f94..0000000 --- a/recipes-security/audit/audit/auditd +++ /dev/null @@ -1,153 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: auditd -# Required-Start: $local_fs -# Required-Stop: $local_fs -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Audit Daemon -# Description: Collects audit information from Linux 2.6 Kernels. -### END INIT INFO - -# Author: Philipp Matthias Hahn <[email protected]> -# Based on Debians /etc/init.d/skeleton and Auditds init.d/auditd.init - -# June, 2012: Adopted for yocto <[email protected]> - -# PATH should only include /usr/* if it runs after the mountnfs.sh script -PATH=/sbin:/bin:/usr/sbin:/usr/bin -DESC="audit daemon" -NAME=auditd -DAEMON=/sbin/auditd -PIDFILE=/var/run/"$NAME".pid -SCRIPTNAME=/etc/init.d/"$NAME" - -# Exit if the package is not installed -[ -x "$DAEMON" ] || exit 0 - -# Read configuration variable file if it is present -[ -r /etc/default/"$NAME" ] && . /etc/default/"$NAME" - -. /etc/default/rcS - -. /etc/init.d/functions - -# -# Function that starts the daemon/service -# -do_start() -{ - # Return - # 0 if daemon has been started - # 1 if daemon was already running - # 2 if daemon could not be started - start-stop-daemon -S --quiet --pidfile "$PIDFILE" --exec "$DAEMON" --test > /dev/null \ - || return 1 - start-stop-daemon -S --quiet --pidfile "$PIDFILE" --exec "$DAEMON" -- \ - $EXTRAOPTIONS \ - || return 2 - if [ -f /etc/audit/audit.rules ] - then - /sbin/auditctl -R /etc/audit/audit.rules >/dev/null - fi -} - -# -# Function that stops the daemon/service -# -do_stop() -{ - # Return - # 0 if daemon has been stopped - # 1 if daemon was already stopped - # 2 if daemon could not be stopped - # other if a failure occurred - start-stop-daemon -K --quiet --pidfile "$PIDFILE" --name "$NAME" - RETVAL="$?" - [ "$RETVAL" = 2 ] && return 2 - # Many daemons don't delete their pidfiles when they exit. - rm -f "$PIDFILE" - rm -f /var/run/audit_events - # Remove watches so shutdown works cleanly - case "$AUDITD_CLEAN_STOP" in - no|NO) ;; - *) /sbin/auditctl -D >/dev/null ;; - esac - return "$RETVAL" -} - -# -# Function that sends a SIGHUP to the daemon/service -# -do_reload() { - start-stop-daemon -K --signal HUP --quiet --pidfile $PIDFILE --name $NAME - return 0 -} - -if [ ! -e /var/log/audit ]; then - mkdir -p /var/log/audit - [ -x /sbin/restorecon ] && /sbin/restorecon -F $(readlink -f /var/log/audit) -fi - -case "$1" in - start) - [ "$VERBOSE" != no ] && echo "Starting $DESC" "$NAME" - do_start - case "$?" in - 0|1) [ "$VERBOSE" != no ] && echo 0 ;; - 2) [ "$VERBOSE" != no ] && echo 1 ;; - esac - ;; - stop) - [ "$VERBOSE" != no ] && echo "Stopping $DESC" "$NAME" - do_stop - case "$?" in - 0|1) [ "$VERBOSE" != no ] && echo 0 ;; - 2) [ "$VERBOSE" != no ] && echo 1 ;; - esac - ;; - reload|force-reload) - echo "Reloading $DESC" "$NAME" - do_reload - echo $? - ;; - restart) - echo "Restarting $DESC" "$NAME" - do_stop - case "$?" in - 0|1) - do_start - case "$?" in - 0) echo 0 ;; - 1) echo 1 ;; # Old process is still running - *) echo 1 ;; # Failed to start - esac - ;; - *) - # Failed to stop - echo 1 - ;; - esac - ;; - rotate) - echo "Rotating $DESC logs" "$NAME" - start-stop-daemon -K --signal USR1 --quiet --pidfile "$PIDFILE" --name "$NAME" - echo $? - ;; - status) - pidofproc "$DAEMON" >/dev/null - status=$? - if [ $status -eq 0 ]; then - echo "$NAME is running." - else - echo "$NAME is not running." - fi - exit $status - ;; - *) - echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload|rotate|status}" >&2 - exit 3 - ;; -esac - -: diff --git a/recipes-security/audit/audit/auditd.service b/recipes-security/audit/audit/auditd.service deleted file mode 100644 index 06c63f0..0000000 --- a/recipes-security/audit/audit/auditd.service +++ /dev/null @@ -1,28 +0,0 @@ -[Unit] -Description=Security Auditing Service -DefaultDependencies=no -After=local-fs.target systemd-tmpfiles-setup.service -Before=sysinit.target shutdown.target -Conflicts=shutdown.target -ConditionKernelCommandLine=!audit=0 - -[Service] -Type=forking -PIDFile=/run/auditd.pid -ExecStart=/sbin/auditd -## To use augenrules, uncomment the next line and comment/delete the auditctl line. -## NOTE: augenrules expect any rules to be added to /etc/audit/rules.d/ -#ExecStartPost=-/sbin/augenrules --load -ExecStartPost=-/sbin/auditctl -R /etc/audit/audit.rules -# By default we don't clear the rules on exit. -# To enable this, uncomment the next line. -#ExecStopPost=/sbin/auditctl -R /etc/audit/audit-stop.rules - -### Security Settings ### -MemoryDenyWriteExecute=true -LockPersonality=true -ProtectControlGroups=true -ProtectKernelModules=true - -[Install] -WantedBy=multi-user.target diff --git a/recipes-security/audit/audit_3.0.1.bb b/recipes-security/audit/audit_3.0.1.bb deleted file mode 100644 index ba24d36..0000000 --- a/recipes-security/audit/audit_3.0.1.bb +++ /dev/null @@ -1,109 +0,0 @@ -SUMMARY = "User space tools for kernel auditing" -DESCRIPTION = "The audit package contains the user space utilities for \ -storing and searching the audit records generated by the audit subsystem \ -in the Linux kernel." -HOMEPAGE = "http://people.redhat.com/sgrubb/audit/"; -SECTION = "base" -LICENSE = "GPLv2+ & LGPLv2+" -LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f" - -SRC_URI = "git://github.com/linux-audit/${BPN}-userspace.git;branch=master \ - file://Fixed-swig-host-contamination-issue.patch \ - file://auditd \ - file://auditd.service \ - file://audit-volatile.conf \ -" - -S = "${WORKDIR}/git" -SRCREV = "46cb7d92443c9ec7b3af15fb0baa65f65f6415d3" - -inherit autotools python3native update-rc.d systemd - -UPDATERCPN = "auditd" -INITSCRIPT_NAME = "auditd" -INITSCRIPT_PARAMS = "defaults" - -SYSTEMD_PACKAGES = "auditd" -SYSTEMD_SERVICE_auditd = "auditd.service" - -DEPENDS = "python3 tcp-wrappers libcap-ng linux-libc-headers swig-native" - -EXTRA_OECONF = " --with-libwrap \ - --enable-gssapi-krb5=no \ - --with-libcap-ng=yes \ - --with-python3=yes \ - --libdir=${base_libdir} \ - --sbindir=${base_sbindir} \ - --without-python \ - --without-golang \ - --disable-zos-remote \ - --with-arm=yes \ - --with-aarch64=yes \ - " - -EXTRA_OEMAKE = "PYLIBVER='python${PYTHON_BASEVERSION}' \ - PYINC='${STAGING_INCDIR}/$(PYLIBVER)' \ - pyexecdir=${libdir}/python${PYTHON_BASEVERSION}/site-packages \ - STDINC='${STAGING_INCDIR}' \ - pkgconfigdir=${libdir}/pkgconfig \ - " - -SUMMARY_audispd-plugins = "Plugins for the audit event dispatcher" -DESCRIPTION_audispd-plugins = "The audispd-plugins package provides plugins for the real-time \ -interface to the audit system, audispd. These plugins can do things \ -like relay events to remote machines or analyze events for suspicious \ -behavior." - -PACKAGES =+ "audispd-plugins" -PACKAGES += "auditd ${PN}-python" - -FILES_${PN} = "${sysconfdir}/libaudit.conf ${base_libdir}/libaudit.so.1* ${base_libdir}/libauparse.so.*" -FILES_auditd = "${bindir}/* ${base_sbindir}/* ${sysconfdir}/* ${datadir}/audit/*" -FILES_audispd-plugins = "${sysconfdir}/audit/audisp-remote.conf \ - ${sysconfdir}/audit/plugins.d/au-remote.conf \ - ${sysconfdir}/audit/plugins.d/syslog.conf \ - ${base_sbindir}/audisp-remote \ - ${base_sbindir}/audisp-syslog \ - ${localstatedir}/spool/audit \ - " -FILES_${PN}-dbg += "${libdir}/python${PYTHON_BASEVERSION}/*/.debug" -FILES_${PN}-python = "${libdir}/python${PYTHON_BASEVERSION}" - -CONFFILES_auditd = "${sysconfdir}/audit/audit.rules" -RDEPENDS_auditd = "bash" - -do_install_append() { - rm -f ${D}/${libdir}/python${PYTHON_BASEVERSION}/site-packages/*.a - rm -f ${D}/${libdir}/python${PYTHON_BASEVERSION}/site-packages/*.la - - # reuse auditd config - [ ! -e ${D}/etc/default ] && mkdir ${D}/etc/default - mv ${D}/etc/sysconfig/auditd ${D}/etc/default - rmdir ${D}/etc/sysconfig/ - - # replace init.d - install -D -m 0755 ${WORKDIR}/auditd ${D}/etc/init.d/auditd - rm -rf ${D}/etc/rc.d - - if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then - # install systemd unit files - install -d ${D}${systemd_unitdir}/system - install -m 0644 ${WORKDIR}/auditd.service ${D}${systemd_unitdir}/system - - install -d ${D}${sysconfdir}/tmpfiles.d/ - install -m 0644 ${WORKDIR}/audit-volatile.conf ${D}${sysconfdir}/tmpfiles.d/ - fi - - # audit-2.5 doesn't install any rules by default, so we do that here - mkdir -p ${D}/etc/audit ${D}/etc/audit/rules.d - cp ${S}/rules/10-base-config.rules ${D}/etc/audit/rules.d/audit.rules - - chmod 750 ${D}/etc/audit ${D}/etc/audit/rules.d - chmod 640 ${D}/etc/audit/auditd.conf ${D}/etc/audit/rules.d/audit.rules - - # Based on the audit.spec "Copy default rules into place on new installation" - cp ${D}/etc/audit/rules.d/audit.rules ${D}/etc/audit/audit.rules - - # Create /var/spool/audit directory for audisp-remote - install -m 0700 -d ${D}${localstatedir}/spool/audit -} -- 2.17.1
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#53515): https://lists.yoctoproject.org/g/yocto/message/53515 Mute This Topic: https://lists.yoctoproject.org/mt/82817559/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
