Hello All,
I am building a basic image (core-image-base) for RPi CM4(Lite) on "Honister"
release with "uboot" as bootloader.
In my conf/local.conf file MACHINE = "raspberrypi4-64" and also I have set
RPI_USE_U_BOOT = "1"
PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
Image builds successfully and I transferred the image to SD card and tried to
boot. I am using WKS_FILE = "sdimage-dual-raspberrypi.wks.in"
sdimage-dual-raspberrypi.wks.in :
part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label
boot --active --align 4096 --size 100
part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label rootfs_A --align
4096
part / --source rootfs --ondisk mmcblk0 --fstype=ext4 --label rootfs_B --align
4096
part /home --source rootfs --rootfs-dir=${IMAGE_ROOTFS}/home --ondisk mmcblk0
--fstype=ext4 --label homefs --align 1024 --size 500 --fsoptions
"x-systemd.growfs"
But unfortunately, i am not able to boot using this image and initially it
starts with
.
.
Detecting USB Device.
.
.
Hit any key to stop auto-boot..
.
.
Starting kernel..
But right after this screen turns off and after a second screen turns on with
"Loading progress bar" and as soon as it loads, a blank screen pops-up. I am
not sure whether system is booted properly or not. I am not able to interact
with it. And no Linux user space is accessible
Sadly, the custom carrier board I am using has no serial console, so I can only
use a RPi display to see the progress and messages.
Can anyone please let me know what could be the issue here and how to resolve
it?
Your help will be much appreciated.
thanks in advance..
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#56253): https://lists.yoctoproject.org/g/yocto/message/56253
Mute This Topic: https://lists.yoctoproject.org/mt/89328890/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
