On Fri, Feb 25, 2022 at 8:36 AM Robert P. J. Day <rpj...@crashcourse.ca> wrote: > > > a friend of mine is diving into trying to boot linux on a meta-riscv > linux starter kit -- he's not using YP, and this is what he's > targeting: > > https://www.aliexpress.com/item/1005003751298305.html > > since i've wanted to jump into meta-riscv for a while, i figured i'd > play along and ordered something more substantial: > > https://www.aliexpress.com/item/1005002796061251.html > > in any event, here's the story so far. > > as a first pass, i just fired up YP and built for qemuriscv64 to > establish a baseline, and that seems to work just fine, booting with > "runqemu nographic." and that at least gives me a bunch of config info > i can look at later. > > as for my actual target board, i know that the meta-riscv layer > defines support for two boards, neither of which is the one i will be > getting, but while i'm waiting for it, i can at least start > documenting all of the relevant settings and config values i'll want > to try. > > i know precious little about meta-riscv, so is there a sane way to > prepare for the eventual arrival of my board? my plan is to get > familiar with how the meta-riscv layer builds for the two supported > boards, so i'll have a handle on what i'll need to configure. > > any further advice would be most appreciated.
We should add them to meta-riscv as reference BSPs. I have port of unmatched locally and have been trying to get the needed changes into meta-sifive which is still pending. > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#56290): https://lists.yoctoproject.org/g/yocto/message/56290 Mute This Topic: https://lists.yoctoproject.org/mt/89391983/21656 Group Owner: yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-