Hi all,
I can netboot my Raspberry Pi 4 still fine, but when I flash the image onto a
usb drive using wic, booting fails. I just stops to boot at one point. I'd be
glad if someone could tell me where it's hanging so I could try to start
tracking it down at the right place. All metalayers are on dunfell but not at
the newest commit.
USB booting was working fine months ago and I don't really know at which point
it stopped working.
This is the last I get from the serial console:
Read config.txt bytes 36302 hnd 0x00000035
Read start4.elf bytes 2229120 hnd 0x000025f8
Read fixup4.dat bytes 5448 hnd 0x0000004b
Firmware: 7d9a298cda813f747b51fe17e1e417e7bf5ca94d May 27 2021 14:02:15
0x00d03114 0x00000000 0x000000ff
MEM GPU: 76 ARM: 947 TOTAL: 1023
Starting start4.elf @ 0xfeb00200 partition 0
Stopping network
Stop display
Display stopped
+
The rest sadly appears on the screen only, so here is an actual screenshot:
https://user.fm/files/v2-1d64d080db788dec685957ae4863e1f4/raspi.png
It seems to detect the usb drive just fine. The last related log line I get is
sd 0:0:0:0: [sda] Attached SCSI removable disk
Whatever is running (the kernel?) is not dead, though. Around 30 seconds later
it prints a "vcc-sd: disabling" and some minutes later a "random: crng init
done" (= random number generator is initialized).
Does anyone have an idea? I'll try to get my hands on an sd card in the
meantime.
Regards,
Manuel
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#56508): https://lists.yoctoproject.org/g/yocto/message/56508
Mute This Topic: https://lists.yoctoproject.org/mt/89911706/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
