I need to see the errors to give a useful answer. If you want wayland, use core-image-weston as the image.
Alex On Wed, 31 Aug 2022 at 13:37, Monsees, Steven C (US) via lists.yoctoproject.org <[email protected]> wrote: > > > Thank you for the quick replay... > > The no graphic option does work but the kernel comes up with errors... > > Will full wayland support be added to the dunfell release ? > > Steve > > -----Original Message----- > From: [email protected] <[email protected]> On Behalf > Of Alexander Kanavin > Sent: Wednesday, August 31, 2022 7:23 AM > To: Monsees, Steven C (US) <[email protected]> > Cc: [email protected] > Subject: Re: [yocto] #yocto #dunfell #qemux86-64 > > External Email Alert > > This email has been sent from an account outside of the BAE Systems network. > > Please treat the email with caution, especially if you are requested to click > on a link, decrypt/open an attachment, or enable macros. For further > information on how to spot phishing, access “Cybersecurity OneSpace Page” and > report phishing by clicking the button “Report Phishing” on the Outlook > toolbar. > > > You need to run this in a X11 session, or use 'nographic' parameter. > > Alex > > On Wed, 31 Aug 2022 at 13:17, Monsees, Steven C (US) via > lists.yoctoproject.org <[email protected]> > wrote: > > > > > > > > Hello: > > > > > > > > I am attempting to evaluate dunfell -23.0.17, on a cetos7 linux box. > > > > > > > > When building the default : core-image-minimal or core-image-sato, > > clean with no errors/warnings, on execution > > > > I get the following error for both (see below)… > > > > > > > > (1) Is this an issue with the release ?, and is there another release I > > should be using ? > > > > (2) Is there something I need to pre-configure for these builds to run > > properly ? > > > > (3) How might I resolve this issue ? > > > > > > > > 06:57 smonsees@yix490016 > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfe > > ll_Min>runqemu qemux86-64 > > > > runqemu - INFO - Running MACHINE=qemux86-64 bitbake -e ... > > > > runqemu - INFO - Continuing with the following parameters: > > > > KERNEL: > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf > > ell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb > > 08507_85f0668fea-r0-qemux86-64-20220830151817.bin] > > > > MACHINE: [qemux86-64] > > > > FSTYPE: [ext4] > > > > ROOTFS: > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202 > > 20830151817.rootfs.ext4] > > > > CONFFILE: > > [/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunf > > ell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-202 > > 20830151817.qemuboot.conf] > > > > > > > > runqemu - INFO - Setting up tap interface under sudo > > > > [sudo] password for smonsees: > > > > runqemu - INFO - Network configuration: > > ip=192.168.7.2::192.168.7.1:255.255.255.0 > > > > runqemu - INFO - Running > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 > > -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev > > tap,id=net0,ifname=tap0,script=no,downscript=no -drive > > file=/disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64-20220830151817.rootfs.ext4,if=virtio,format=raw > > -show-cursor -usb -device usb-tablet -object > > rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 > > -cpu core2duo -m 256 -serial mon:vc -serial null -kernel > > /disk0/scratch/smonsees/yocto/yocto-dunfell/poky-dunfell-23.0.17/dunfell_Min/tmp/deploy/images/qemux86-64/bzImage--5.4.192+gitAUTOINC+3fecb08507_85f0668fea-r0-qemux86-64-20220830151817.bin > > -append 'root=/dev/vda rw mem=256M > > ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 ' > > > > > > > > runqemu - ERROR - Failed to run qemu: Could not initialize SDL(x11 not > > available) - exiting > > > > > > > > runqemu - INFO - Cleaning up > > > > Set 'tap0' nonpersistent > > > > > > > > Thank you for your help, > > > > Steve > > > > > > > > > > > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#57958): https://lists.yoctoproject.org/g/yocto/message/57958 Mute This Topic: https://lists.yoctoproject.org/mt/93368526/21656 Mute #yocto:https://lists.yoctoproject.org/g/yocto/mutehashtag/yocto Mute #dunfell:https://lists.yoctoproject.org/g/yocto/mutehashtag/dunfell Mute #qemux86-64:https://lists.yoctoproject.org/g/yocto/mutehashtag/qemux86-64 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
