On 11-02-08 12:31 PM, Diego Sueiro wrote:
Bruce,
I've updated my yocto tree but I'm still getting this error:
ERROR: Function 'do_kernel_checkout' failed (see
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
for further information)
ERROR: Logfile of failure stored in:
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
Log data follows:
| Fixing up git directory for standard/devkit8000
| error: pathspec 'devkit8000-standard' did not match any file(s) known
to git.
| ERROR: Function 'do_kernel_checkout' failed (see
/home/dev-2/yocto/build/tmp/work/bw-b600-poky-linux-gnueabi/linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1/temp/log.do_kernel_checkout.26330
for further information)
NOTE: package
linux-yocto-stable-2.6.34+git1+e1f85a470934a0cf6abde5d95533e74501822c6b_6+72ca49ab08b8eb475cec82a10049503602325791-r1:
task do_kernel_checkout: Failed
ERROR: Task 1
(/home/dev-2/yocto/poky/meta-boardware/recipes-kernel/linux/linux-yocto-stable_git.bb
<http://linux-yocto-stable_git.bb>, do_kernel_checkout) failed with exit
code '1'
This is the typical BSP bootstrap 'problem'. Hold on for
just a little while longer, with the new fetcher changes
in master, I'm updating the recipes (literally now) to
fix this and am testing the workflow for adding a new board
as part of these changes.
Cheers,
Bruce
I've tried this two options on
SRCREV_machine_pn-linux-yocto-stable_devkit8000:
"ef7f944e773950d4016b7643f9ecf052bbe250cd" = beagleboard-standard branch
"2b1caf6ed7b888c95a1909d343799672731651a5" = master branch
"72ca49ab08b8eb475cec82a10049503602325791" = standard branch
There isn't an specific devki8000 branch.
Regards,
--
*dS
Diego Sueiro
/*long live rock 'n roll*/
On Tue, Feb 8, 2011 at 12:11 PM, Bruce Ashfield
<[email protected] <mailto:[email protected]>> wrote:
On 11-02-08 08:46 AM, Diego Sueiro wrote:
Folks,
I'm trying to get devkit8000 kernel compiled with
linux-yocto-stable recipe.
I've added devkit8000 on COMPATIBLE_MACHINE and on
KMACHINE_dekvkit800.
But I don't know what pokylinux branch to use to make the kernel
build
works.
I believe that I have to config these variables:
LINUX_KERNEL_TYPE
This one defaults to something sane, so you don't need
to set this line.
SRCREV_machine_pn-linux-yocto-stable_devkit8000
You would need to set this, to a SRCREV of the branch you'll
end up building.
Any suggestions?
Are you working out of an up to date master ? I've made some
changes recently that allow BSPs to bootstrap/reuse existing
branches. If you aren't on the latest master the procedure
is different.
Cheers,
Bruce
Regards,
--
*dS
Diego Sueiro
/*long live rock 'n roll*/
_______________________________________________
yocto mailing list
[email protected] <mailto:[email protected]>
https://lists.yoctoproject.org/listinfo/yocto
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
