Op 15 jul 2011, om 20:33 heeft Darren Hart het volgende geschreven: > Jason, Koen, > > Does anything spring to mind as an obvious fix for this? Perhaps some > kernel parameter initialization string for the graphics hardware?
I've never seen it in angstrom, so you'd have to see what meta-yocto is doing different. In other news, for beagleboard please use the meta-ti layer for that, it's the offcial upstream for beagle and is known to work. > > -- > Darren > > On 07/15/2011 08:30 AM, Jeff Mitchell wrote: >> Darren Hart suggested I send this to the list... >> >> Attached is a picture of my screen running Terminal. This is on a >> BeagleBoard xM rev C connected via its HDMI out to a DVI adapter and >> then into a Dell UltraSharp monitor. Angstrom doesn't display these >> problems, so the setup should be fine. >> >> I'm not quite sure what is causing this. The resolution is also fairly >> low, and I haven't had any success using boot parameters (either the >> older video=omapfb:mode variant or the newer DSS2 omapfb.mode variant). >> >> Thanks, >> Jeff >> >> >> >> _______________________________________________ >> yocto mailing list >> [email protected] >> https://lists.yoctoproject.org/listinfo/yocto > > -- > Darren Hart > Intel Open Source Technology Center > Yocto Project - Linux Kernel _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
