On 19 Aug 2011, at 21:49, Richard Purdie wrote:
On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote:
On 19 Aug 2011, at 17:16, Richard Purdie wrote:
On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote:
I've got a configuration that builds ok under 4.0.1, but when I
build
under 5.0.1 I get the following right at the end:
Installing task-poky-boot (1.0-r7) to root...
Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk.
Installing task-sjs (1.0-r0) to root...
Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/
Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk.
Unknown package 'run-postinsts'.
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following
dependencies for task-poky-boot:
* tinylogin * busybox * modutils-initscripts * initscripts *
console-tools * initscripts * udev * sysvinit * netbase *
base-
passwd *
* opkg_install_cmd: Cannot install package task-poky-boot.
* satisfy_dependencies_for: Cannot satisfy the following
dependencies for task-sjs:
* yocto-wallboard * psplash * syslinux *
* opkg_install_cmd: Cannot install package task-sjs.
* opkg_install_cmd: Cannot install package run-postinsts.
ERROR: Function 'do_rootfs' failed (see ...
If I look in tmp/work, it looks as if the missing dependencies have
all been built and packaged within their work areas.
I tried cleaning and rebuilding 'task-sjs', but that made no
difference to the errors reported against it.
Where should I start looking to work out what's going wrong here?
Is
it as simple as needing to add something like RDEPENDS?
This sounds like the machine specific packages are failing to be
found
so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS
isn't listing everything it needs to (such as the machine name) or
the
package system isn't finding a group of packages for some other
reason.
Thanks, but that's way over my head at the moment ;-)
I've searched through the meta data for PACKAGE_ARCHS, but that's not
thrown anything up to make me think there was anything I should
look at.
I'm using my own machine recipe. Is this were I should be looking?
Yes, I suspect something about your machine config is resulting in
this
but its hard to me to say what.
You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the
contents of variables. I'm curious if your machine name is listed in
that list.
chris@ubuntu:~/yocto/ebox3300-build$ bitbake -e |grep "PACKAGE_ARCHS"
# PACKAGE_ARCHS=all any noarch ${PACKAGE_EXTRA_ARCHS} ${MACHINE_ARCH}
PACKAGE_ARCHS="all any noarch x86 Vortex86DX"
ipkg_archs = bb.data.getVar('PACKAGE_ARCHS',d)
bb.error("PACKAGE_ARCHS missing")
My machine is "Vortex86DX"
Chris Tapp
[email protected]
www.keylevel.com
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
