Hi, I'm building the QEMU build...
'Where' are the video settings defined/specified ? Regards Noel. PS: made a typo on the org--post "sometimes it is red, or red.. " had to be "sometimes it is red, or yellow.." -----Original Message----- From: Gary Thomas [mailto:[email protected]] Sent: 5Oct11 15:45 To: Vellemans, Noel Cc: [email protected] Subject: Re: [yocto] Sato Font-shadow ? On 2011-10-05 07:40, Vellemans, Noel wrote: > > Hi all > > > I've build the beta-test build [wget > _http://git.yoctoproject.org/cgit/cgit.cgi/poky/snapshot/poky-f8cddd74 > 574756174a82c856cecdeb6f83b9dea5.tar.bz2_] { core-image-sato } > > The build succeeds but there is 'STRANGE' thing, the fonts seem to > contain a shadow, this shadow color is not always the same color (sometimes it is red, or red.. or whatever combination). > > The best place where you can see it is on the CLOCK that is displayed on the top of the screen, another place where you can see it is when you open a terminal window. > > Anyone that has seen the same behavior ? > Where do I start looking ? > > Regards Noel > > NOTE: If I do replace the rootfs with one from the yocto web-site... this faultly-'shadow'-behavoir is gone. What's your hardware platform? I saw this on a BeagleBoard [equivalent] due to improper video settings. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ) _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
