On 08/12/11 21:18, Sathishkumar Duraisamy wrote: > On Fri, Dec 9, 2011 at 10:37 AM, Sathishkumar Duraisamy > <bewithsath...@gmail.com> wrote: >> On Fri, Dec 9, 2011 at 10:28 AM, Joshua Lock <j...@linux.intel.com> wrote: >>> On 08/12/11 20:52, Sathishkumar Duraisamy wrote: >>>> Hi, >>>> >>>> I migrating from Openembedded to yocto project and using Beagleboard >>>> as playground. >>>> >>>> On Fri, Dec 9, 2011 at 3:27 AM, Joshua Lock <j...@linux.intel.com> wrote: >>>>> >>>>> On 05/12/11 10:35, madeeha javed wrote: >>>>>> I an using Yocto Edison. My machine configuration is beagleboard. And >>>>>> when I launch hob and Bake. I get a message that Output Image Type is >>>>>> not set.When I Edit-> Preferences, I see that jffs2 and tar.bz2 are >>>>>> set. And even if I select a different type, the message keeps is >>>>>> there. >>>>> >>>> I too faced similar problem for hob. >>>> >>>>> Madeeha, >>>>> >>>>> I'm not able to replicate this issue. Have you modified any of the >>>>> configuration files by hand? The three key files in build/conf are >>>>> hob-post.conf, hob-pre.conf, local.conf >>>> >>>> Please find these files in the attachment. >>> >>> Did you forget the attachment? Or did the mailing list strip it? >> >> Sorry, I forget to attach. >>> >>>> >>>>> >>>>> It's possible you've hard-assigned the variable in there. >>>>> >>>>> If you can provide more information I can try and replicate. A copy of >>>>> the above configuration files would be useful. >>>> >>>> In openembedded, I see the some lines like this >>>> >>>> # Add the required image file system types below. Valid are >>>> # jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz), >>>> ext4(.gz|.bz2), >>>> # squashfs, squashfs-lzma >>>> IMAGE_FSTYPES = "jffs2 tar" >>>> >>>> which is moved to hob-post.conf, which may causing the problems I hope. >>> > > I forget to say, in bash terminal, it works fine. In hob only it > causing the issue. >
The hob-pre and hob-post files are not used from the terminal, unless you explicitly pass them. I will look at the configuration files you've shared. Also, can you tell us how you are launching hob? Regards, Joshua -- Joshua Lock Yocto Project "Johannes factotum" Intel Open Source Technology Centre _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto