Valdiated on v2011.12 with hardware:
U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
Reset Status: Software Hard, External/Internal Soft, External/Internal Hard
CPU: e300c3, MPC8315E, Rev: 1.2 at 400 MHz, CSB: 133.333 MHz
Board: Freescale MPC8315ERDB Rev 1.0
I2C: ready
DRAM: 128 MiB (DDR2, 32-bit, ECC off, 266.667 MHz)
Flash: 8 MiB
NAND: 32 MiB
PCIE0: No link
PCIE1: No link
In: serial
Out: serial
Err: serial
Net: eTSEC0, eTSEC1
Hit any key to stop autoboot: 0
=> ver
U-Boot 2011.12 (Jan 26 2012 - 16:55:23)MPC83XX
powerpc-poky-linux-gcc (GCC) 4.6.3 20111117 (prerelease)
GNU ld (GNU Binutils) 2.22
=>
Signed-off-by: Paul Gortmaker <[email protected]>
diff --git a/meta-yocto/conf/machine/mpc8315e-rdb.conf
b/meta-yocto/conf/machine/mpc8315e-rdb.conf
index d3a5b1c..74ef611 100644
--- a/meta-yocto/conf/machine/mpc8315e-rdb.conf
+++ b/meta-yocto/conf/machine/mpc8315e-rdb.conf
@@ -7,6 +7,9 @@ require conf/machine/include/tune-ppc603e.inc
KERNEL_IMAGETYPE = "uImage"
+EXTRA_IMAGEDEPENDS += "u-boot"
+UBOOT_MACHINE_mpc8315e-rdb = "MPC8315ERDB_config"
+
SERIAL_CONSOLE = "115200 ttyS0"
MACHINE_FEATURES = "kernel26 keyboard pci ext2 ext3 serial"
--
1.7.7
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
