Hi Gary, On Wed, Apr 4, 2012 at 4:10 PM, Gary Thomas <[email protected]> wrote: > On 2012-04-04 06:50, Bruce Ashfield wrote: >> >> On 12-04-04 08:04 AM, Andrea Galbusera wrote: >>> >>> Hi Tomas, >>> >>> On Wed, Apr 4, 2012 at 12:14 PM, Tomas Frydrych >>> <[email protected]> wrote: >>>> >>>> Hi, >>>> >>>> I am trying to get Yocto image built from yesterday's master >>>> (Linux-3.0.23-yocto-standard) to boot on the NAND-less version of >>>> BeagleBoard xM, but the kernel panics with: >>>> >>>> ----------------- console log start ------------ >>>> >>>> Waiting for root device /dev/mmcblk0p2... >>>> mmc0: new SDHC card at address 1234 >>>> mmcblk0: mmc0:1234 SA04G 3.67 GiB (ro) >>>> mmcblk0: p1 p2 >>>> >>>> VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2) >>>> Please append a correct "root=" boot option; here are the available >>>> partitions: >>>> >>>> b300 3858432 mmcblk0 driver: mmcblk >>>> b301 120456 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1 >>>> b302 3445942 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2 >>>> >>>> VFS: Unable to mount root fs on unknown-block(179,2) >>>> User configuration error - no valid root filesystem found >>>> Kernel panic - not syncing: Invalid configuration from end user prevents >>>> continuing >>>> >>>> -------------- console log end ------------------------------------ >>>> >>>> My guess would be the problem is the card being detected as 'ro' (line >>>> 3), but I do not know why that is (there is no lock switch on mmc >>>> cards). >>>> >>>> The card itself is fine, it's the original card that came with the >>>> board, the original Angstrom demo boots fine from it, and yocto kernel >>>> 2.6.37 also used to boot. >>>> >>>> Tomas >>> >>> >>> Looks related to the comment I wrote here: >>> https://bugzilla.yoctoproject.org/show_bug.cgi?id=1892 >>> I have a slightly different failure with yocto 1.2 beta snapshot (same >>> kernel) but seems related. Needs more investigation. >>> Anyone else having problem booting on beagleboard xM? Seems something >>> wrong happened after 1.1 release... >> >> >> We are working on several bugs on our reference beagleboard. The problem >> is that my beagleboard died (a horrible painful death) and the other >> boards >> that are directly available to are RevC and they are booting. So things >> are slowed down a bit .. but we are trying to get to the bottom of it, >> as fast as possible. > > > Just FYI, it also doesn't boot on my rev-C3 (not xM), albeit with a > different > error pattern. It hangs at this point: > > Waiting for root device /dev/mmcblk0p2... > mmc0: error -110 whilst initialising SD card
That's exactly the same error I see! Happy to know am not alone... > Looks like you might need the attached patch? I'm going to give it a try as soon as I can. Did you already submit it somewhere? Andrea _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
