Hi, I am using a Fedora 16 64bit build server. I am using meta-n450 BSP. I have built a 32bit image that boots. I want to build a 64bit image. I added TARGET_ARCH ="x86_64"to my local.conf file. My build doesn't run successfully when this is changed:
/home/tester/yocto/N450QAT/tmp/work/atom_pc-poky-linux/core-image-minimal-initramfs-1.0-r0/temp/run.do_rootfs.15179: line 119: x86_64-poky- linux-depmod: command not found ERROR: Function 'do_rootfs' failed (see /home/tester/yocto/N450QAT/tmp/work/atom_pc-poky-linux/core-image-minimal-initramfs-1.0-r0/temp/log .do_rootfs.15179 for further information) Trying to find the correct procedure to change the target architecture system -------------------------------------------------------------- Intel Shannon Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 Business address: Dromore House, East Park, Shannon, Co. Clare This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
