>-----Original Message----- >From: Zanussi, Tom >Sent: Monday, April 09, 2012 11:07 AM >To: Bodke, Kishore K >Cc: [email protected] >Subject: Re: [PATCH 7/7] Cedartrail: Update the README. > >On Tue, 2012-04-03 at 16:43 -0700, [email protected] wrote: >> From: Kishore Bodke <[email protected]> >> >> Update the README file with instructions to build >> with pvr graphics driver. >> >> Signed-off-by: Kishore Bodke <[email protected]> >> --- >> meta-cedartrail/README | 41 >+++++++++++++++++++++++++++++++++++++++-- >> 1 files changed, 39 insertions(+), 2 deletions(-) >> >> diff --git a/meta-cedartrail/README b/meta-cedartrail/README >> index 295e9ff..f482cca 100755 >> --- a/meta-cedartrail/README >> +++ b/meta-cedartrail/README >> @@ -52,10 +52,23 @@ common metadata shared between BSPs) e.g.: >> yocto/meta-intel \ >> yocto/meta-intel/meta-cedartrail \ >> >> -To enable the cedartrail layer, add the cedartrail MACHINE to >local.conf: >> +To enable the cedartrail layer that supports Power VR graphics, >> +add the cedartrail MACHINE to local.conf: >> >> MACHINE ?= "cedartrail" >> >> + >> +Power VR Graphics user-space driver binaries are covered by a >> +"Intel Free Distribution Binary License". The build of this driver >> +can be enabled by adding the following line to the local.conf file: >> + >> +LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0" >> + >> +To enable the layer that does not support Power VR graphics >> +add the following to the local.conf file: >> + >> + MACHINE ?= "cedartrail-nopvr" >> + >> You should then be able to build a cedartrail image as such: >> >> $ source oe-init-build-env >> @@ -85,7 +98,7 @@ Under Linux, insert a USB flash drive. Assuming the >USB flash drive >> takes device /dev/sdf, use dd to copy the live image to it. For >> example: >> >> -# dd if=core-image-sato-cedartrail-20120105232035.hddimg of=/dev/sdf >> +# dd if=core-image-sato-cedartrail-20120403210525.hddimg of=/dev/sdf >> # sync >> # eject /dev/sdf >> >> @@ -109,3 +122,27 @@ the syslinux boot: prompt, or the boot: prompt >contains strange >> characters), try doing this first: >> >> # dd if=/dev/zero of=/dev/sdf bs=1M count=512 >> + >> +Miscellaneous Notes >> +==================== >> + >> +Video and Music Samples >> +----------------------- >> +This BSP includes recipes to download Ogg format video and >> +music files that can be played-back with the Video and music players >> +included in the sato images. The sample files are installed in >> +/home/Music and /home/Videos directories. >> + >> + >> +Adding Glxgears to image >> +------------------------- >> +Glxgears can be added to the generated image by adding "debug-tweaks" >> +option to the extra image features variable in the default local.conf >> +before building the BSP. > >I think the thing that adds glxgears is tools-testapps and not >debug-tweaks. You have tools-testapps below which is probably why it >works, but you might want to verify that and change the README text if >so.
Yeah, you are right. I copied from Edison branch. Rahul, could you also change this README in the Edison branch. Thanks Kishore. > >Tom > >> + >> +e.g. to add Glxgears, locate the following line in local.conf >> +EXTRA_IMAGE_FEATURES = "debug-tweaks" >> + >> +and change above line to.. >> + >> +EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps" > _______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
