Hi,
How can I source a shell script within a bbclass? For example, in
meta-xilinx/classes/xilinx-boot.bbclass, I need to source a script file called
settings64.sh, which setups the environment variables for the Xilinx ISE 14.1
design tools, in order to generate a system ace image file.
For the following code snippet:
if [ "${XILINX_VER}" \> "14" ]; then
bbnote "XILINX_VER ${XILINX_VER}, script location
${XILINX_LOC}/${EDK_SCRIPT}"
source ${XILINX_LOC}/${EDK_SCRIPT} ${XILINX_LOC}
fi
I get the following error:
DEBUG: Executing python function sstate_task_prefunc
DEBUG: Python function sstate_task_prefunc finished
DEBUG: Executing shell function do_deploy
ERROR: Function failed: do_deploy (see
/tool/yocto/poky/build/tmp/work/ppc440-poky-linux/u-boot-xilinx-v2012.04.01-r16/temp/log.do_deploy.15616
for further information)
NOTE: Deploying uboot elf image to /project/xilinx-ml507
NOTE: Xilinx design tools installed in /tool/xilinx/14.1/ISE_DS
NOTE: Generate system ace image
NOTE: EDK_SCRIPT settings64.sh
NOTE: XILINX_VER 14.1, script location /tool/xilinx/14.1/ISE_DS/settings64.sh
/tool/yocto/poky/build/tmp/work/ppc440-poky-linux/u-boot-xilinx-v2012.04.01-r16/temp/run.do_deploy.15616:
129:
/tool/yocto/poky/build/tmp/work/ppc440-poky-linux/u-boot-xilinx-v2012.04.01-r16/temp/run.do_deploy.15616:
source: not found
if I replace the source keyword with a . (dot)
if [ "${XILINX_VER}" \> "14" ]; then
bbnote "XILINX_VER ${XILINX_VER}, script location
${XILINX_LOC}/${EDK_SCRIPT}"
. ${XILINX_LOC}/${EDK_SCRIPT} ${XILINX_LOC}
fi
it executes the scripts but gives the following error:
NOTE: XILINX_VER 14.1, script location /tool/xilinx/14.1/ISE_DS/settings64.sh
/tool/yocto/poky/build/tmp/work/ppc440-poky-linux/u-boot-xilinx-v2012.04.01-r16/temp/run.do_deploy.7879:
12: [:
/tool/yocto/poky/build/tmp/work/ppc440-poky-linux/u-boot-xilinx-v2012.04.01-r16/temp/run.do_deploy.7879:
unexpected operator
. /tool/xilinx/14.1/ISE_DS/common/.settings64.sh /tool/xilinx/14.1/ISE_DS/common
. /tool/xilinx/14.1/ISE_DS/EDK/.settings64.sh /tool/xilinx/14.1/ISE_DS/EDK
. /tool/xilinx/14.1/ISE_DS/common/CodeSourcery/.settings64.sh
/tool/xilinx/14.1/ISE_DS/common/CodeSourcery
. /tool/xilinx/14.1/ISE_DS/PlanAhead/.settings64.sh
/tool/xilinx/14.1/ISE_DS/PlanAhead
. /tool/xilinx/14.1/ISE_DS/../../Vivado/2012.1/.settings64.sh
/tool/xilinx/14.1/ISE_DS/../../Vivado/2012.1
. /tool/xilinx/14.1/ISE_DS/ISE/.settings64.sh /tool/xilinx/14.1/ISE_DS/ISE
. /tool/xilinx/14.1/ISE_DS/SysGen/.settings64.sh /tool/xilinx/14.1/ISE_DS/SysGen
What should I do to source the settings64.sh file properly within the bbclass?
Best regards,
Elvis Dowson_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
