On 09/07/12 11:42, Andrei Gherzan wrote:
On Mon, Jul 9, 2012 at 1:39 PM, James Abernathy <[email protected]
<mailto:[email protected]>> wrote:
my goal of this test was to see if I could use the n450 BSP as a
starting point for a BSP to support my Acer Aspire One n450 based
netbook. The core-image-sato will boot from USB key on the
netbook if I use the ZIP drive format for the USB key, but the
current n450 BSP doesn't include the drivers for the networking
hardware in the netbook.
I found by testing, using the menuconfig option documented in the
Developer Manual Appendix B example, that I needed to add 2
parameters to the .config:
CONFIG_ATH9K_PCI
CONFIG_ATL1C
To make this change easier to manage and more permanent, I thought
about creating a config fragment. I put the config parameters in
a file, myconfig, in the linux-yocto directory at the same level
as the linux-yocto_3.2.bbappend file, where I added:
SRC_URI += "file//myconfig"
Try to use myconfig.cfg.
@g
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
I agree, something in the back of my mind is shouting that config
fragments should have a .cfg extension.
Regards,
--
Jack Mitchell ([email protected])
Embedded Systems Engineer
http://www.embed.me.uk
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
